INA2137PA vs INA2134PA Vergleich
Detaillierter Direktvergleich von INA2137PA von Texas Instruments und INA2134PA von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
INA2134PA - Dual 0dB Audio Differential Receiver | Texas Instruments
INA2134PA ✓ AktivSpezifikationsvergleich
| Parameter | INA2137PA | INA2134PA |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Product Type | Dual audio differential line receiver | — |
| Channel Count | 2 channels | — |
| Nominal Gain Option 1 | 0.5 (-6 dB) | — |
| Nominal Gain Option 2 | 2 (+6 dB) | — |
| Gehäuse | 14-pin PDIP (N) | — |
| Montageart | Through-hole | Through-hole |
| Supply Voltage Options | 9 V, 12 V, 15 V, 18 V, 24 V, or 28 V | — |
| Input Configuration | Differential | — |
| Signal Category | Audio | — |
| Manufacturer | Texas Instruments | — |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | -40 °C to +85 °C |
| Versorgungsstrom | [DATA_NEEDED: supply current] | — |
| Eingangsspannungsbereich | [DATA_NEEDED: input voltage range] | — |
| Ausgangsspannungsbereich | [DATA_NEEDED: output voltage range] | — |
| Frequency Response | [DATA_NEEDED: frequency response] | — |
| Noise Performance | [DATA_NEEDED: input noise voltage or noise density] | — |
| Common-Mode Rejection Ratio | [DATA_NEEDED: common-mode rejection ratio] | 90 dB minimum |
| Bandwidth | [DATA_NEEDED: bandwidth] | — |
| Power Dissipation | [DATA_NEEDED: power dissipation] | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | [DATA_NEEDED: lead-free status] |
| Halogen-Free Status | [DATA_NEEDED: halogen-free status] | — |
| Number of Channels | — | 2 channels |
| Voltage Gain | — | 1 V/V (0 dB) |
| Architecture | — | Dual audio differential line receiver |
| Supply Voltage Range | — | -18 V to +18 V |
| Ruhestrom | — | 2.9 mA maximum |
| Total Harmonic Distortion + Noise | — | 0.0005% at 1 kHz |
| Slew Rate | — | 14 V/µs |
| Gain Resistors | — | On-chip precision resistors |
| Package Type | — | PDIP (N), 14 pins |
| Output Swing | — | [DATA_NEEDED: output voltage swing] |
| Settling Time | — | [DATA_NEEDED: settling time to 0.01%] |
| Input Noise Floor | — | [DATA_NEEDED: input noise floor] |
| Common-Mode Input Voltage Range | — | [DATA_NEEDED: common-mode input voltage range] |
| Input Impedance | — | [DATA_NEEDED: differential input impedance] |
| Output Impedance | — | [DATA_NEEDED: output impedance] |