INA2137PA vs INA2134PA Comparaison
Comparaison détaillée côte à côte de INA2137PA par Texas Instruments et INA2134PA par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
INA2134PA - Dual 0dB Audio Differential Receiver | Texas Instruments
INA2134PA ✓ ActifComparaison des spécifications
| Paramètre | INA2137PA | INA2134PA |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | Dual audio differential line receiver | — |
| Channel Count | 2 channels | — |
| Nominal Gain Option 1 | 0.5 (-6 dB) | — |
| Nominal Gain Option 2 | 2 (+6 dB) | — |
| Boîtier | 14-pin PDIP (N) | — |
| Type de montage | Through-hole | Through-hole |
| Supply Voltage Options | 9 V, 12 V, 15 V, 18 V, 24 V, or 28 V | — |
| Input Configuration | Differential | — |
| Signal Category | Audio | — |
| Manufacturer | Texas Instruments | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | -40 °C to +85 °C |
| Courant d'alimentation | [DATA_NEEDED: supply current] | — |
| Plage de tension d'entrée | [DATA_NEEDED: input voltage range] | — |
| Plage de tension de sortie | [DATA_NEEDED: output voltage range] | — |
| Frequency Response | [DATA_NEEDED: frequency response] | — |
| Noise Performance | [DATA_NEEDED: input noise voltage or noise density] | — |
| Common-Mode Rejection Ratio | [DATA_NEEDED: common-mode rejection ratio] | 90 dB minimum |
| Bandwidth | [DATA_NEEDED: bandwidth] | — |
| Power Dissipation | [DATA_NEEDED: power dissipation] | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | [DATA_NEEDED: lead-free status] |
| Halogen-Free Status | [DATA_NEEDED: halogen-free status] | — |
| Number of Channels | — | 2 channels |
| Voltage Gain | — | 1 V/V (0 dB) |
| Architecture | — | Dual audio differential line receiver |
| Supply Voltage Range | — | -18 V to +18 V |
| Courant de repos | — | 2.9 mA maximum |
| Total Harmonic Distortion + Noise | — | 0.0005% at 1 kHz |
| Slew Rate | — | 14 V/µs |
| Gain Resistors | — | On-chip precision resistors |
| Package Type | — | PDIP (N), 14 pins |
| Output Swing | — | [DATA_NEEDED: output voltage swing] |
| Settling Time | — | [DATA_NEEDED: settling time to 0.01%] |
| Input Noise Floor | — | [DATA_NEEDED: input noise floor] |
| Common-Mode Input Voltage Range | — | [DATA_NEEDED: common-mode input voltage range] |
| Input Impedance | — | [DATA_NEEDED: differential input impedance] |
| Output Impedance | — | [DATA_NEEDED: output impedance] |