ITS4130QEPDXUMA1 vs ITS4090QEPDXUMA1 Comparison
Detailed side-by-side comparison of ITS4130QEPDXUMA1 by Infineon and ITS4090QEPDXUMA1 by Infineon. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | ITS4130QEPDXUMA1 | ITS4090QEPDXUMA1 |
|---|---|---|
| Brand | Infineon | Infineon |
| Category | Power MOSFET Drivers | Power Distribution Switches |
| Lifecycle Status | Active | Active |
| Topology | High-Side Power Switch (1:1) | High-Side Switch (N-Channel DMOS) |
| Number of Channels | 4 (Quad) | 4 |
| On-State Resistance RDS(ON) | 130 mΩ (typ at Tj=25°C), 205 mΩ (typ at Tj=125°C) | — |
| Per-Channel Current | 650 mA (DC, per channel) | — |
| Load-Dump Tolerance | 45 V | — |
| Switch Type | N-Channel MOSFET | — |
| Package | PG-TSDSO-14 (14-pin, exposed pad) | PG-TSDSO-14 (exposed pad) |
| Mounting Type | Surface Mount | Surface Mount |
| Operating Temperature | -40C to +125C (Tj) | — |
| Fault Protection | Over-current, Over-temperature, Over-voltage, Open-load detection | — |
| Diagnostic Output | Yes (status/feedback pin) | — |
| Reverse Polarity Protection | Achievable with external 150Ω GND resistor or GND diode+27Ω series resistor | — |
| Family | PROFET Industrial (ITS41xxQ-EP-D series) | PROFET (PROtected FET) 24V/48V |
| Product Status | Active / Production | — |
| RoHS Status | Compliant | Compliant |
| MSL Level | MSL3 (per Infineon package handling guidelines) | [DATA_NEEDED: MSL rating] |
| Product Type | — | Quad-Channel Smart High-Side Power Switch |
| Typical RDS(ON) per Channel | — | 90 mΩ |
| RDS(ON) at Tj = 125 °C | — | 140 mΩ (typical) |
| Nominal Continuous Output Current per Channel | — | 750 mA |
| Minimum Current per Channel | — | 500 mA |
| Supply Voltage Range (Operating) | — | 4.5 V to 45 V |
| Supply Voltage Range (Absolute Maximum) | — | -0.3 V to 45 V |
| On-State Input Voltage (Logic High) | — | [DATA_NEEDED: VIH threshold] |
| Operating Temperature Range | — | -40 °C to +150 °C (Tj) |
| Diagnostic Feedback | — | Current-sense IS pin (analog proportional to load) |
| Protection Features | — | Over-current, over-temperature, over-voltage, short-circuit, reverse battery (with external resistor) |
| PWM Capability | — | Up to 1 kHz (typical) |