ITS4130QEPDXUMA1 vs ITS4090QEPDXUMA1 तुलना
विस्तृत दोनों ओर की तुलना ITS4130QEPDXUMA1 द्वारा Infineon और ITS4090QEPDXUMA1 द्वारा Infineon. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | ITS4130QEPDXUMA1 | ITS4090QEPDXUMA1 |
|---|---|---|
| ब्रांड | Infineon | Infineon |
| श्रेणी | Power MOSFET Drivers | Power Distribution Switches |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| टोपोलॉजी | High-Side Power Switch (1:1) | High-Side Switch (N-Channel DMOS) |
| Number of Channels | 4 (Quad) | 4 |
| On-State Resistance RDS(ON) | 130 mΩ (typ at Tj=25°C), 205 mΩ (typ at Tj=125°C) | — |
| Per-Channel Current | 650 mA (DC, per channel) | — |
| Load-Dump Tolerance | 45 V | — |
| Switch Type | N-Channel MOSFET | — |
| पैकेज | PG-TSDSO-14 (14-pin, exposed pad) | PG-TSDSO-14 (exposed pad) |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| ऑपरेटिंग तापमान | -40C to +125C (Tj) | — |
| Fault Protection | Over-current, Over-temperature, Over-voltage, Open-load detection | — |
| Diagnostic Output | Yes (status/feedback pin) | — |
| Reverse Polarity Protection | Achievable with external 150Ω GND resistor or GND diode+27Ω series resistor | — |
| Family | PROFET Industrial (ITS41xxQ-EP-D series) | PROFET (PROtected FET) 24V/48V |
| Product Status | Active / Production | — |
| RoHS स्थिति | Compliant | Compliant |
| MSL स्तर | MSL3 (per Infineon package handling guidelines) | [DATA_NEEDED: MSL rating] |
| Product Type | — | Quad-Channel Smart High-Side Power Switch |
| Typical RDS(ON) per Channel | — | 90 mΩ |
| RDS(ON) at Tj = 125 °C | — | 140 mΩ (typical) |
| Nominal Continuous Output Current per Channel | — | 750 mA |
| Minimum Current per Channel | — | 500 mA |
| Supply Voltage Range (Operating) | — | 4.5 V to 45 V |
| Supply Voltage Range (Absolute Maximum) | — | -0.3 V to 45 V |
| On-State Input Voltage (Logic High) | — | [DATA_NEEDED: VIH threshold] |
| ऑपरेटिंग तापमान रेंज | — | -40 °C to +150 °C (Tj) |
| Diagnostic Feedback | — | Current-sense IS pin (analog proportional to load) |
| Protection Features | — | Over-current, over-temperature, over-voltage, short-circuit, reverse battery (with external resistor) |
| PWM Capability | — | Up to 1 kHz (typical) |