ITS4130QEPDXUMA1 vs ITS4090QEPDXUMA1 مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ ITS4130QEPDXUMA1 بواسطة Infineon و ITS4090QEPDXUMA1 بواسطة Infineon. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
مقارنة المواصفات
| المعامل | ITS4130QEPDXUMA1 | ITS4090QEPDXUMA1 |
|---|---|---|
| العلامة التجارية | Infineon | Infineon |
| الفئة | Power MOSFET Drivers | Power Distribution Switches |
| حالة دورة الحياة | نشط | نشط |
| البنية الطوبولوجية | High-Side Power Switch (1:1) | High-Side Switch (N-Channel DMOS) |
| Number of Channels | 4 (Quad) | 4 |
| On-State Resistance RDS(ON) | 130 mΩ (typ at Tj=25°C), 205 mΩ (typ at Tj=125°C) | — |
| Per-Channel Current | 650 mA (DC, per channel) | — |
| Load-Dump Tolerance | 45 V | — |
| Switch Type | N-Channel MOSFET | — |
| العلبة | PG-TSDSO-14 (14-pin, exposed pad) | PG-TSDSO-14 (exposed pad) |
| نوع التركيب | Surface Mount | Surface Mount |
| درجة حرارة التشغيل | -40C to +125C (Tj) | — |
| Fault Protection | Over-current, Over-temperature, Over-voltage, Open-load detection | — |
| Diagnostic Output | Yes (status/feedback pin) | — |
| Reverse Polarity Protection | Achievable with external 150Ω GND resistor or GND diode+27Ω series resistor | — |
| Family | PROFET Industrial (ITS41xxQ-EP-D series) | PROFET (PROtected FET) 24V/48V |
| Product Status | Active / Production | — |
| حالة RoHS | Compliant | Compliant |
| مستوى MSL | MSL3 (per Infineon package handling guidelines) | [DATA_NEEDED: MSL rating] |
| Product Type | — | Quad-Channel Smart High-Side Power Switch |
| Typical RDS(ON) per Channel | — | 90 mΩ |
| RDS(ON) at Tj = 125 °C | — | 140 mΩ (typical) |
| Nominal Continuous Output Current per Channel | — | 750 mA |
| Minimum Current per Channel | — | 500 mA |
| Supply Voltage Range (Operating) | — | 4.5 V to 45 V |
| Supply Voltage Range (Absolute Maximum) | — | -0.3 V to 45 V |
| On-State Input Voltage (Logic High) | — | [DATA_NEEDED: VIH threshold] |
| نطاق درجة حرارة التشغيل | — | -40 °C to +150 °C (Tj) |
| Diagnostic Feedback | — | Current-sense IS pin (analog proportional to load) |
| Protection Features | — | Over-current, over-temperature, over-voltage, short-circuit, reverse battery (with external resistor) |
| PWM Capability | — | Up to 1 kHz (typical) |