ITS711L1FUMA1 vs BTS51202EKAXUMA1 Comparison
Detailed side-by-side comparison of ITS711L1FUMA1 by Infineon and BTS51202EKAXUMA1 by Infineon. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Infineon
ITS711L1FUMA1
ITS711L1FUMA1 - 4-Ch Smart High-Side Switch 1.7A PG-DSO-20 | Infineon
ITS711L1FUMA1 β ActiveInfineon
BTS51202EKAXUMA1
BTS51202EKAXUMA1 - 120 mΞ© Dual Smart High-Side Switch | Infineon
BTS51202EKAXUMA1 β ActiveSpecification Comparison
| Parameter | ITS711L1FUMA1 | BTS51202EKAXUMA1 |
|---|---|---|
| Brand | Infineon | Infineon |
| Category | Power MOSFET Drivers | Power MOSFET Drivers |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $1.98 | $1.68 |
| Switch Type | High-Side Power Switch | β |
| Number of Outputs | 4 | β |
| Input:Output Ratio | 1:1 | β |
| Output Configuration | High Side | β |
| Output Type | N-Channel | β |
| Continuous Output Current (per channel) | 1.7 A | β |
| Maximum Load Current (package) | 4.4 A | β |
| Load Voltage Range | 5 V to 34 V | β |
| Supply Voltage (Vcc) | Not Required (Logic-level inputs) | β |
| Input Interface | CMOS-compatible, ground-referenced | β |
| Technology | Smart SIPMOS (vertical N-channel DMOS + CMOS logic) | Smart6 (N-channel vertical MOSFET with charge pump) |
| On-State Resistance (Rdson) | [DATA_NEEDED: Rdson per channel] | β |
| Diagnostic Feedback | Yes (open-drain status output) | β |
| Embedded Protection | Over-load, Over-voltage, Over-temperature, Short-circuit | β |
| Package | PG-DSO-20-31 (DSO-20) | PG-DSO-14-40-EP (14-pin SOIC with exposed pad) |
| Mounting Type | Surface Mount | Surface Mount |
| Operating Temperature | -40C to +85C | -40 Β°C to +150 Β°C |
| Series | PROFET Industrial | β |
| RoHS Status | Compliant | Compliant |
| Topology | β | Dual High-Side Switch (2 channels) |
| Number of Channels | β | 2 |
| On-State Resistance (RDS(on)) | β | 120 mΞ© (typical per channel) |
| Continuous Output Current | β | 2 A per channel (typical 2.5 A) |
| Operating Voltage (Vbb) | β | 8 V to 18 V |
| Load Type | β | Lamps up to 1Γ10 W, LEDs, resistive/inductive loads |
| Maximum Power Dissipation | β | 1800 mW |
| Integrated Protection | β | Over-current, Short-circuit, Over-temperature, Over-voltage, Under-voltage lockout, Reverse battery |
| Diagnostic Output | β | Yes (status feedback pin) |
| Charge Pump | β | Integrated |
| Automotive Qualified | β | Yes |