ITS711L1FUMA1 vs BTS51202EKAXUMA1 Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng ITS711L1FUMA1 sa pamamagitan ng Infineon at BTS51202EKAXUMA1 sa pamamagitan ng Infineon. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Infineon
ITS711L1FUMA1 - 4-Ch Smart High-Side Switch 1.7A PG-DSO-20 | Infineon
ITS711L1FUMA1 ✓ NakahandaInfineon
BTS51202EKAXUMA1 - 120 mΩ Dual Smart High-Side Switch | Infineon
BTS51202EKAXUMA1 ✓ NakahandaPagsanggunian na paghahambing
| Parametro | ITS711L1FUMA1 | BTS51202EKAXUMA1 |
|---|---|---|
| Brand | Infineon | Infineon |
| Kategorya | Power MOSFET Drivers | Power MOSFET Drivers |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Switch Type | High-Side Power Switch | — |
| Bilang ng Outputs | 4 | — |
| Input:Output Ratio | 1:1 | — |
| Output Kumpigurasyon | High Side | — |
| Type ng Output | N-Channel | — |
| Continuous Output Current (per channel) | 1.7 A | — |
| Maximum Load Current (package) | 4.4 A | — |
| Load Voltage Range | 5 V to 34 V | — |
| Supply Voltage (Vcc) | Not Required (Logic-level inputs) | — |
| Input Interface | CMOS-compatible, ground-referenced | — |
| Technology | Smart SIPMOS (vertical N-channel DMOS + CMOS logic) | Smart6 (N-channel vertical MOSFET with charge pump) |
| On-State Resistance (Rdson) | [DATA_NEEDED: Rdson per channel] | — |
| Diagnostic Feedback | Yes (open-drain status output) | — |
| Embedded Protection | Over-load, Over-voltage, Over-temperature, Short-circuit | — |
| Packhaging | PG-DSO-20-31 (DSO-20) | PG-DSO-14-40-EP (14-pin SOIC with exposed pad) |
| Uri ng Pagpapasok | Surface Mount | Surface Mount |
| Temperature na Operasyon | -40C to +85C | -40 °C to +150 °C |
| Series | PROFET Industrial | — |
| Tindminan RoHS | Compliant | Compliant |
| Topolohiya | — | Dual High-Side Switch (2 channels) |
| Number of Channels | — | 2 |
| On-State Resistance (RDS(on)) | — | 120 mΩ (typical per channel) |
| Continuous Output Current | — | 2 A per channel (typical 2.5 A) |
| Operating Voltage (Vbb) | — | 8 V to 18 V |
| Load Type | — | Lamps up to 1×10 W, LEDs, resistive/inductive loads |
| Maximum Power Dissipation | — | 1800 mW |
| Integrated Protection | — | Over-current, Short-circuit, Over-temperature, Over-voltage, Under-voltage lockout, Reverse battery |
| Diagnostic Output | — | Yes (status feedback pin) |
| Charge Pump | — | Integrated |
| Automotive Qualified | — | Yes |