ITS711L1FUMA1 vs BTS51202EKAXUMA1 Сравнение
Подробное сравнение бок о бок ITS711L1FUMA1 от Infineon и BTS51202EKAXUMA1 от Infineon. Сравните ключевые характеристики, электрические параметры, упаковку, статус жизненного цикла, цены и наличие, чтобы выбрать лучший компонент для ваших требований.
Infineon
ITS711L1FUMA1 - 4-Ch Smart High-Side Switch 1.7A PG-DSO-20 | Infineon
ITS711L1FUMA1 ✓ АктивенInfineon
BTS51202EKAXUMA1 - 120 mΩ Dual Smart High-Side Switch | Infineon
BTS51202EKAXUMA1 ✓ АктивенСравнение характеристик
| Параметр | ITS711L1FUMA1 | BTS51202EKAXUMA1 |
|---|---|---|
| Бренд | Infineon | Infineon |
| Категория | Power MOSFET Drivers | Power MOSFET Drivers |
| Статус жизненного цикла | Активен | Активен |
| Наличие | In Stock | In Stock |
| Цена за единицу (USD) | $1,98 | $1,68 |
| Switch Type | High-Side Power Switch | — |
| Количество выходов | 4 | — |
| Input:Output Ratio | 1:1 | — |
| Выходная конфигурация | High Side | — |
| Тип выхода | N-Channel | — |
| Continuous Output Current (per channel) | 1.7 A | — |
| Maximum Load Current (package) | 4.4 A | — |
| Load Voltage Range | 5 V to 34 V | — |
| Supply Voltage (Vcc) | Not Required (Logic-level inputs) | — |
| Input Interface | CMOS-compatible, ground-referenced | — |
| Technology | Smart SIPMOS (vertical N-channel DMOS + CMOS logic) | Smart6 (N-channel vertical MOSFET with charge pump) |
| On-State Resistance (Rdson) | [DATA_NEEDED: Rdson per channel] | — |
| Diagnostic Feedback | Yes (open-drain status output) | — |
| Embedded Protection | Over-load, Over-voltage, Over-temperature, Short-circuit | — |
| Корпус | PG-DSO-20-31 (DSO-20) | PG-DSO-14-40-EP (14-pin SOIC with exposed pad) |
| Тип монтажа | Surface Mount | Surface Mount |
| Рабочая температура | -40C to +85C | -40 °C to +150 °C |
| Series | PROFET Industrial | — |
| Статус RoHS | Compliant | Compliant |
| Топология | — | Dual High-Side Switch (2 channels) |
| Number of Channels | — | 2 |
| On-State Resistance (RDS(on)) | — | 120 mΩ (typical per channel) |
| Continuous Output Current | — | 2 A per channel (typical 2.5 A) |
| Operating Voltage (Vbb) | — | 8 V to 18 V |
| Load Type | — | Lamps up to 1×10 W, LEDs, resistive/inductive loads |
| Maximum Power Dissipation | — | 1800 mW |
| Integrated Protection | — | Over-current, Short-circuit, Over-temperature, Over-voltage, Under-voltage lockout, Reverse battery |
| Diagnostic Output | — | Yes (status feedback pin) |
| Charge Pump | — | Integrated |
| Automotive Qualified | — | Yes |