KSZ8041FTL-S vs KSZ8041TLI Comparison

Detailed side-by-side comparison of KSZ8041FTL-S by Microchip Technology and KSZ8041TLI by Microchip Technology. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.

Microchip Technology
KSZ8041FTL-S KSZ8041FTL-S - 10/100 Ethernet PHY | Microchip | 48-TQFP

KSZ8041FTL-S - 10/100 Ethernet PHY | Microchip | 48-TQFP

KSZ8041FTL-S ✓ Active
Microchip Technology
KSZ8041TLI KSZ8041TLI - 10/100 Ethernet PHY | Microchip Technology

KSZ8041TLI - 10/100 Ethernet PHY | Microchip Technology

KSZ8041TLI ✓ Active

Specification Comparison

Parameter KSZ8041FTL-S KSZ8041TLI
Brand Microchip Technology Microchip Technology
Category Interface ICs Interface ICs
Lifecycle Status Active Active
Stock Status — In Stock
Unit Price (USD) — $3.61
Product Type 10/100 Ethernet physical-layer transceiver —
Ethernet Standards 10Base-T and 100Base-TX IEEE 802.3 and IEEE 802.3u
Host Interface MII, RMII, and SMII —
Number of Transmitters 1 channel —
Number of Receivers 1 channel —
Supply Voltage Range 3.135 V to 3.465 V —
Supply Type Single supply Single supply
Auto MDI/MDIX Support HP Auto MDI/MDIX —
Package 48-TQFP, 7 x 7 mm —
Pin Count 48 pins 48 pins
Mounting Type Surface mount Surface mount
Data Rate 10 Mb/s and 100 Mb/s —
Mixed-Signal Architecture Extended signaling distance and reduced power consumption —
Configuration Strapping Speed, duplex, auto-negotiation, power-down, and PHY address —
Operating Temperature [DATA_NEEDED: operating temperature range] —
RoHS Status [DATA_NEEDED: RoHS status] [DATA_NEEDED: verified RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: verified REACH status]
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification] —
Device Type — 10Base-T/100Base-TX Ethernet physical-layer transceiver
Supported Data Rates — 10 Mbps and 100 Mbps
Channel Count — 1 channel
Host Interfaces — MII, RMII, and SMII
Typical Operating Supply Voltage — 3.3 V
Operating Voltage Range — 3.135 V to 3.465 V
Auto-Negotiation — Enabled by hardware pin strapping on pin 42 or software through register 0h bit 12
Auto-Negotiation Standard — Clause 28 of the IEEE 802.3u specification
Package Type — 48-pin TQFP
Package Dimensions — 7 mm x 7 mm
Operating Temperature Range — [DATA_NEEDED: verified operating temperature range]
MDI/MDIX Support — HP Auto MDI/MDIX

Datasheets & Resources

Browse All Products Create BOM Request Quote