KSZ8041FTL-S - 10/100 Ethernet PHY | Microchip | 48-TQFP
MPN: KSZ8041FTL-S ✓ ActiveKSZ8041FTL-S Overview
An Ethernet physical-layer transceiver, commonly called an Ethernet PHY, converts digital frames handled by an Ethernet media-access controller into signals suitable for twisted-pair cabling. It forms the physical-layer element within the broader Ethernet interface hierarchy, which also includes the MAC, clock and timing circuitry, magnetics, connectors, and cable. The KSZ8041 family is intended for embedded systems requiring 10 Mb/s or 100 Mb/s Ethernet connectivity over copper cabling.
The KSZ8041 provides MII, RMII, and SMII interfaces, allowing it to connect with controllers operating under different parallel-interface conventions. A single 3.3 V supply reduces the number of external rails required in embedded equipment. Its 48-TQFP package provides enough pins for the Ethernet data interfaces, control signals, clocking connections, physical-layer management functions, and power-ground connections required by the device.
The mixed-signal architecture is a central product characteristic. According to the Microchip product page, this design extends signaling distance and reduces power consumption relative to conventional approaches. The PHY supports automatic MDI/MDIX handling through HP Auto MDI/MDIX, simplifying connections to standard Ethernet ports without requiring separate crossover cables in common installations.
Typical applications include industrial Ethernet controllers, embedded web servers, set-top equipment, printers, network bridges, industrial automation equipment, and communications modules. The RMII interface is particularly useful where connector count and board area are important, while MII or SMII support provides flexibility for designs using different Ethernet controller architectures.
PCB implementation requires close attention to the manufacturer hardware-design checklist, particularly configuration strap values and reset behavior. Strapping pins control speed, duplex, auto-negotiation, power-down functionality, and PHY address, and their levels are latched during power-up and reset. Confirm the required logic levels before finalizing a board because MAC receive signals may influence straps during startup.
This product page organizes the electrical characteristics, package information, drop-in family alternatives, application guidance, and design checklist references around the KSZ8041FTL-S. It is intended to accelerate component identification, PCB footprint planning, sourcing, and first-pass feasibility assessment for 10/100 Ethernet designs.
Drop-in alternatives for KSZ8041FTL-S — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with KSZ8041FTL-S (same form factor and footprint) — differing in Package, Ethernet Standards, Product Type, Data Rate, Device Type.
KSZ8041FTL
✅ Drop-InContact for price
View Datasheet →KSZ8041TL
✅ Drop-InContact for price
View Datasheet →KSZ8041TLI
✅ Drop-In✓ In Stock
$3.6094 / Unit
View Datasheet →KSZ8041FTLI
✅ Drop-InContact for price
View Datasheet →KSZ8041FTL-S Specifications
| Product Type | 10/100 Ethernet physical-layer transceiver |
| Ethernet Standards | 10Base-T and 100Base-TX |
| Host Interface | MII, RMII, and SMII |
| Number of Transmitters | 1 channel |
| Number of Receivers | 1 channel |
| Supply Voltage Range | 3.135 V to 3.465 V |
| Supply Type | Single supply |
| Auto MDI/MDIX Support | HP Auto MDI/MDIX |
| Package | 48-TQFP, 7 x 7 mm |
| Pin Count | 48 pins |
| Mounting Type | Surface mount |
| Data Rate | 10 Mb/s and 100 Mb/s |
| Mixed-Signal Architecture | Extended signaling distance and reduced power consumption |
| Configuration Strapping | Speed, duplex, auto-negotiation, power-down, and PHY address |
KSZ8041FTL-S 48-tqfp, 7 x 7 mm Pin Configuration Guide
Pin configuration for KSZ8041FTL-S (48-tqfp, 7 x 7 mm package). Pin numbering, functions, and connection diagrams are defined in the manufacturer datasheet. Refer to it for the exact footprint and soldering guidelines.
No detailed pinout data available for KSZ8041FTL-S.
Refer to the datasheet for full pin configuration.
Typical Applications
KSZ8041FTL-S is suitable for 6 applications: Industrial Ethernet Equipment, Embedded Web Server, Network Printer, Set-Top and Media Device, Network Bridge and Gateway, KSZ8041FTL Evaluation Design.
Industrial Ethernet Equipment
The KSZ8041FTL-S is well suited to industrial controllers, sensors, and automation equipment requiring 10Base-T or 100Base-TX connectivity. Its single 3.135 V to 3.465 V supply and selectable MII, RMII, or SMII interface let the designer match the PHY to the available Ethernet MAC. HP Auto MDI/MDIX operation simplifies direct connection to standard Ethernet ports, while the mixed-signal design is intended to extend signaling distance and reduce power consumption. Configuration straps must be designed so the latched speed, duplex, auto-negotiation, power-down, and PHY-address values remain valid during power-up and reset.
Recommended
Embedded Web Server
The KSZ8041FTL-S can provide the physical layer for an embedded web server or network-control appliance. A host controller can communicate through MII, RMII, or SMII, allowing the design to use the interface that best balances performance, pin count, and board area. The transceiver supports 10 Mb/s and 100 Mb/s operation and operates from a single 3.3 V-class supply. In compact products, RMII is useful for reducing host-side connections, while Auto MDI/MDIX removes the need for a crossover cable in many point-to-point installations.
Recommended
Network Printer
The KSZ8041FTL-S fits network-printing equipment that needs a compact, standard copper-Ethernet interface. Its 48-TQFP package supports the full MII, RMII, and SMII interface choices, allowing the board designer to connect it to an embedded printer controller with limited host I/O. The 10Base-T and 100Base-TX support covers legacy and fast Ethernet links, while HP Auto MDI/MDIX simplifies integration with existing network wiring. Board planning should reserve space for magnetics, RJ-series connectors, decoupling, and the manufacturer-recommended Ethernet layout constraints.
Recommended
Set-Top and Media Device
The KSZ8041FTL-S is suitable for set-top boxes, media endpoints, and communications devices requiring 10/100 Ethernet alongside other mixed-signal functions. Its mixed-signal implementation is designed to extend signaling distance and reduce power consumption, useful in compact consumer and communications hardware. The PHY can be paired with an Ethernet MAC through RMII for a comparatively compact host interface or through MII or SMII when the controller already uses those signaling conventions. The 3.135 V to 3.465 V operating range supports integration into 3.3 V power systems.
Recommended
Network Bridge and Gateway
The KSZ8041FTL-S can serve as the Ethernet physical layer in bridges, protocol gateways, and communications concentrators. Supporting MII, RMII, and SMII provides flexibility when the gateway uses a legacy parallel MAC, a compact reduced-pin interface, or a source-synchronous controller. The device operates at 10 Mb/s or 100 Mb/s and includes HP Auto MDI/MDIX for straightforward copper-network connections. In a bridge design, the PHY straps should be reviewed carefully because speed, duplex, auto-negotiation, power-down behavior, and PHY address are latched during startup and reset.
Recommended
KSZ8041FTL Evaluation Design
The KSZ8041FTL-S is appropriate for an evaluation board intended to reproduce a complete 10/100 Ethernet physical layer. The 48-TQFP package exposes the full MII, RMII, and SMII interface set, enabling engineers to compare host-interface options before committing to production hardware. The board should include the required Ethernet magnetics and connector arrangement, a controlled reset path, accessible configuration straps, and test points for supply, clock, management, and differential copper pairs. Use the KSZ8041FTL Hardware Design Checklist, document 00002857A, when constructing the evaluation platform.
Recommended
Recommended Products Summary
Engineering reference data for KSZ8041FTL-S — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | KSZ8041FTL | KSZ8041TL | KSZ8041TLI | KSZ8041FTLI |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 48-TQFP (7 x 7 mm) | 48-TQFP (7 x 7 mm) - same | 48-TQFP (7 x 7 mm) - same | 48-TQFP (7 x 7 mm) - same | 48-TQFP (7 x 7 mm) - same |
| Ethernet Function | 10Base-T/100Base-TX physical-layer transceiver | 10Base-T/100Base-TX physical-layer transceiver | 10Base-T/100Base-TX physical-layer transceiver | 10Base-T/100Base-TX physical-layer transceiver | 10Base-T/100Base-TX physical-layer transceiver |
Key Differentiators
- Exact family replacement with matching package (vs KSZ8041FTL)
- Three host-interface choices in one PHY (vs KSZ8041TL)
- Mixed-signal implementation for embedded Ethernet (vs KSZ8041TLI)
Design Notes
Treat the configuration straps as a startup-sensitive interface. The KSZ8041FTL Hardware Design Checklist states that speed, duplex, auto-negotiation, power-down functionality, and PHY address are latched during power-up and reset. Ensure that MAC receive inputs cannot impose unintended levels on strap pins before the intended values are captured. A controlled reset and carefully sized strap network are more reliable than relying on system firmware to correct an incorrectly configured PHY.
Use the manufacturer hardware-design checklist as the layout authority for the 48-TQFP footprint, magnetics, RJ-series connector, supply decoupling, and Ethernet differential pairs. Keep the Ethernet signal path away from switching nodes and noisy clock sources, and follow the specified component-side geometry for the differential pairs. The 7 x 7 mm TQFP footprint leaves little room for routing corrections, so validate connector placement, magnetics orientation, and test access before fabrication.
Plan the 3.135 V to 3.465 V single-supply rail so it remains within the device operating range at the connector and near the PHY. Place the required local bypass capacitors beside their associated power and ground pins and provide a low-impedance return path. Review the manufacturer data sheet for exact capacitor values, permitted ceramic types, voltage-bias requirements, and sequencing constraints rather than substituting values from an unrelated Ethernet PHY.
Account for the clocking method selected with MII, RMII, or SMII. The host MAC and PHY must agree on source, frequency, and timing requirements for the selected interface. RMII can reduce host-side pin count, while MII and SMII can suit different MAC architectures. Before routing, check the interface timing and recommended trace-length constraints in the manufacturer documentation and avoid introducing unnecessary stubs or test-point discontinuities into sensitive clock or data paths.
Compliance Information
Compliance status requires confirmation from the current Microchip product declaration or material compliance report.