KSZ8041FTL-S vs KSZ8041TLI Comparaison

Comparaison détaillée côte à côte de KSZ8041FTL-S par Microchip Technology et KSZ8041TLI par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Microchip Technology
KSZ8041FTL-S KSZ8041FTL-S - 10/100 Ethernet PHY | Microchip | 48-TQFP

KSZ8041FTL-S - 10/100 Ethernet PHY | Microchip | 48-TQFP

KSZ8041FTL-S ✓ Actif
Microchip Technology
KSZ8041TLI KSZ8041TLI - 10/100 Ethernet PHY | Microchip Technology

KSZ8041TLI - 10/100 Ethernet PHY | Microchip Technology

KSZ8041TLI ✓ Actif

Comparaison des spécifications

Paramètre KSZ8041FTL-S KSZ8041TLI
Marque Microchip Technology Microchip Technology
Catégorie Interface ICs Interface ICs
Statut du cycle de vie Actif Actif
Statut du stock — In Stock
Prix unitaire (USD) — $3,61
Product Type 10/100 Ethernet physical-layer transceiver —
Ethernet Standards 10Base-T and 100Base-TX IEEE 802.3 and IEEE 802.3u
Host Interface MII, RMII, and SMII —
Number of Transmitters 1 channel —
Number of Receivers 1 channel —
Supply Voltage Range 3.135 V to 3.465 V —
Supply Type Single supply Single supply
Auto MDI/MDIX Support HP Auto MDI/MDIX —
Boîtier 48-TQFP, 7 x 7 mm —
Nombre de broches 48 pins 48 pins
Type de montage Surface mount Surface mount
Débit de données 10 Mb/s and 100 Mb/s —
Mixed-Signal Architecture Extended signaling distance and reduced power consumption —
Configuration Strapping Speed, duplex, auto-negotiation, power-down, and PHY address —
Température de fonctionnement [DATA_NEEDED: operating temperature range] —
Statut RoHS [DATA_NEEDED: RoHS status] [DATA_NEEDED: verified RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: verified REACH status]
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification] —
Device Type — 10Base-T/100Base-TX Ethernet physical-layer transceiver
Supported Data Rates — 10 Mbps and 100 Mbps
Channel Count — 1 channel
Host Interfaces — MII, RMII, and SMII
Typical Operating Supply Voltage — 3.3 V
Operating Voltage Range — 3.135 V to 3.465 V
Auto-Negotiation — Enabled by hardware pin strapping on pin 42 or software through register 0h bit 12
Auto-Negotiation Standard — Clause 28 of the IEEE 802.3u specification
Package Type — 48-pin TQFP
Package Dimensions — 7 mm x 7 mm
Plage de température de fonctionnement — [DATA_NEEDED: verified operating temperature range]
MDI/MDIX Support — HP Auto MDI/MDIX

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis