LM2903NG vs LM393N Comparison
Detailed side-by-side comparison of LM2903NG by onsemi and LM393N by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | LM2903NG | LM393N |
|---|---|---|
| Brand | onsemi | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Number of Comparators | 2 (dual independent) | 2 (dual) |
| Supply Voltage Range (Single) | 2 V to 36 V | — |
| Supply Voltage Range (Split) | +/-1 V to +/-18 V | — |
| Input Offset Voltage | 1 mV typ (low offset) | — |
| Input Bias Current | 250 nA | — |
| Response Time (typ) | 1.3 us to 1.5 us | — |
| Output Type | Open-Collector | Open-Collector / Open-Drain (single-ended) |
| Input Common-Mode Range | Extends to ground (negative rail) with single supply | — |
| Operating Temperature Range | -40C to +105C | 0 C to +70 C (LM393N) / -40 C to +85 C (LM2903N) |
| Package | PDIP-8 (8-pin through-hole) | 8-PDIP (DIP-8, through-hole) |
| Mounting Type | Through Hole | Through-Hole |
| Family | LM393 / LM2903 series | — |
| Supply Current (per comparator, typ) | [DATA_NEEDED: supply current] | — |
| Output Saturation Voltage | [DATA_NEEDED: saturation voltage] | — |
| Differential Input Voltage Range | [DATA_NEEDED: differential input range] | — |
| Common-Mode Rejection Ratio | [DATA_NEEDED: CMRR] | — |
| ESD Rating | [DATA_NEEDED: ESD rating] | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | Non-RoHS (LM393N); RoHS on LM393N/NOPB variant |
| Comparator Type | — | Dual General-Purpose Comparator |
| Input Offset Voltage (max) | — | 5 mV (LM393N); 2 mV (LM193/LM393A grade) |
| Input Bias Current (typ) | — | 25 nA |
| Supply Voltage Range (single supply) | — | 2 V to 36 V |
| Supply Voltage Range (dual supply) | — | ±1 V to ±18 V |
| Output Sink Current (max) | — | 16 mA |
| Propagation Delay (typ) | — | 1.3 us (300 mV overdrive) |
| Common-Mode Input Range | — | 0 V to VCC - 1.5 V (ground sensing) |
| Quiescent Current (typ) | — | 0.4 mA per comparator (0.8 mA total) |