LM2903NG vs LM393N Vergleich

Detaillierter Direktvergleich von LM2903NG von onsemi und LM393N von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.

Texas Instruments
LM393N LM393N - Dual Comparator 2-36V Open-Collector | 8-PDIP

LM393N - Dual Comparator 2-36V Open-Collector | 8-PDIP

LM393N ✓ Aktiv

Spezifikationsvergleich

Parameter LM2903NG LM393N
Marke onsemi Texas Instruments
Kategorie Amplifier ICs Amplifier ICs
Lebenszyklusstatus Aktiv Aktiv
Number of Comparators 2 (dual independent) 2 (dual)
Supply Voltage Range (Single) 2 V to 36 V —
Supply Voltage Range (Split) +/-1 V to +/-18 V —
Input Offset Voltage 1 mV typ (low offset) —
Input Bias Current 250 nA —
Response Time (typ) 1.3 us to 1.5 us —
Ausgangstyp Open-Collector Open-Collector / Open-Drain (single-ended)
Input Common-Mode Range Extends to ground (negative rail) with single supply —
Betriebstemperaturbereich -40C to +105C 0 C to +70 C (LM393N) / -40 C to +85 C (LM2903N)
Gehäuse PDIP-8 (8-pin through-hole) 8-PDIP (DIP-8, through-hole)
Montageart Through Hole Through-Hole
Family LM393 / LM2903 series —
Supply Current (per comparator, typ) [DATA_NEEDED: supply current] —
Output Saturation Voltage [DATA_NEEDED: saturation voltage] —
Differential Input Voltage Range [DATA_NEEDED: differential input range] —
Common-Mode Rejection Ratio [DATA_NEEDED: CMRR] —
ESD Rating [DATA_NEEDED: ESD rating] —
RoHS-Status [DATA_NEEDED: RoHS status] Non-RoHS (LM393N); RoHS on LM393N/NOPB variant
Comparator Type — Dual General-Purpose Comparator
Input Offset Voltage (max) — 5 mV (LM393N); 2 mV (LM193/LM393A grade)
Input Bias Current (typ) — 25 nA
Supply Voltage Range (single supply) — 2 V to 36 V
Supply Voltage Range (dual supply) — ±1 V to ±18 V
Output Sink Current (max) — 16 mA
Propagation Delay (typ) — 1.3 us (300 mV overdrive)
Common-Mode Input Range — 0 V to VCC - 1.5 V (ground sensing)
Quiescent Current (typ) — 0.4 mA per comparator (0.8 mA total)

Datenblätter & Ressourcen

Alle Produkte durchsuchen BOM erstellen Angebot anfordern