LM2903NG vs LM393N Perbandingan
Perbandingan bersamaan detil LM2903NG dari onsemi dan LM393N dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | LM2903NG | LM393N |
|---|---|---|
| Merek | onsemi | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Number of Comparators | 2 (dual independent) | 2 (dual) |
| Supply Voltage Range (Single) | 2 V to 36 V | — |
| Supply Voltage Range (Split) | +/-1 V to +/-18 V | — |
| Input Offset Voltage | 1 mV typ (low offset) | — |
| Input Bias Current | 250 nA | — |
| Response Time (typ) | 1.3 us to 1.5 us | — |
| Tipe Output | Open-Collector | Open-Collector / Open-Drain (single-ended) |
| Input Common-Mode Range | Extends to ground (negative rail) with single supply | — |
| Rentang Suhu Kerja | -40C to +105C | 0 C to +70 C (LM393N) / -40 C to +85 C (LM2903N) |
| Paket | PDIP-8 (8-pin through-hole) | 8-PDIP (DIP-8, through-hole) |
| Tipe Mounting | Through Hole | Through-Hole |
| Family | LM393 / LM2903 series | — |
| Supply Current (per comparator, typ) | [DATA_NEEDED: supply current] | — |
| Output Saturation Voltage | [DATA_NEEDED: saturation voltage] | — |
| Differential Input Voltage Range | [DATA_NEEDED: differential input range] | — |
| Common-Mode Rejection Ratio | [DATA_NEEDED: CMRR] | — |
| ESD Rating | [DATA_NEEDED: ESD rating] | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | Non-RoHS (LM393N); RoHS on LM393N/NOPB variant |
| Comparator Type | — | Dual General-Purpose Comparator |
| Input Offset Voltage (max) | — | 5 mV (LM393N); 2 mV (LM193/LM393A grade) |
| Input Bias Current (typ) | — | 25 nA |
| Supply Voltage Range (single supply) | — | 2 V to 36 V |
| Supply Voltage Range (dual supply) | — | ±1 V to ±18 V |
| Output Sink Current (max) | — | 16 mA |
| Propagation Delay (typ) | — | 1.3 us (300 mV overdrive) |
| Common-Mode Input Range | — | 0 V to VCC - 1.5 V (ground sensing) |
| Quiescent Current (typ) | — | 0.4 mA per comparator (0.8 mA total) |