LM2904QDRG4 vs LM2904QDRG4Q1 Comparison
Detailed side-by-side comparison of LM2904QDRG4 by Texas Instruments and LM2904QDRG4Q1 by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
LM2904QDRG4Q1 - Dual 26 V AEC-Q100 Op Amp, 700 kHz, SOIC-8 | Texas Instruments
LM2904QDRG4Q1 ✓ ActiveSpecification Comparison
| Parameter | LM2904QDRG4 | LM2904QDRG4Q1 |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Product Type | Dual general-purpose operational amplifier | — |
| Number of Amplifier Channels | 2 circuits | — |
| Maximum Total Supply Voltage | 26 V | — |
| Recommended Single-Supply Operation | Up to 26 V | — |
| Recommended Dual-Supply Operation | ±13 V | — |
| Gain-Bandwidth Product | 700 kHz per channel | — |
| Slew Rate | 0.3 V/µs | 0.3 V/us |
| Typical Supply-Current Drain | 0.7 mA | — |
| Common-Mode Input Range | Includes ground | — |
| Compensation | Internally frequency compensated | Internal (internally compensated) |
| Package | 8-SOIC, 3.90 mm body width | 8-SOIC (DBV), 0.154 in (3.90 mm) width |
| Package Body Width | 3.90 mm | — |
| Packaging | Tape and reel | Tape and Reel (TR) |
| Mounting Type | Surface mount | Surface Mount |
| Application Category | Automotive and industrial control systems | — |
| Operating Temperature Range | [DATA_NEEDED: operating temperature range] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Output Current | [DATA_NEEDED: output current] | — |
| Output Voltage Swing | [DATA_NEEDED: output voltage swing] | — |
| RoHS Compliance | [DATA_NEEDED: RoHS compliance status] | — |
| Amplifier Type | — | General Purpose, single-supply |
| Number of Circuits | — | 2 (independent channels) |
| Supply Voltage Range | — | 3 V to 26 V |
| Maximum Supply Voltage | — | 26 V |
| Gain Bandwidth Product | — | 700 kHz |
| Supply Current (per amplifier) | — | 0.7 mA typical |
| Common-Mode Rejection Ratio (CMRR) | — | 65 dB |
| Automotive Qualification | — | AEC-Q100 qualified |
| Number of Pins | — | 8 |
| Output Swing | — | [DATA_NEEDED: output voltage swing] |
| Common-Mode Input Voltage Range | — | Includes ground; upper limit [DATA_NEEDED: common-mode input voltage range maximum] |
| Shutdown / Enable | — | None (no shutdown pin) |
| RoHS Status | — | Compliant |