LM2904QDRG4 vs LM2904QDRG4Q1 Comparaison
Comparaison détaillée côte à côte de LM2904QDRG4 par Texas Instruments et LM2904QDRG4Q1 par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
LM2904QDRG4Q1 - Dual 26 V AEC-Q100 Op Amp, 700 kHz, SOIC-8 | Texas Instruments
LM2904QDRG4Q1 ✓ ActifComparaison des spécifications
| Paramètre | LM2904QDRG4 | LM2904QDRG4Q1 |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | Dual general-purpose operational amplifier | — |
| Number of Amplifier Channels | 2 circuits | — |
| Maximum Total Supply Voltage | 26 V | — |
| Recommended Single-Supply Operation | Up to 26 V | — |
| Recommended Dual-Supply Operation | ±13 V | — |
| Gain-Bandwidth Product | 700 kHz per channel | — |
| Slew Rate | 0.3 V/µs | 0.3 V/us |
| Typical Supply-Current Drain | 0.7 mA | — |
| Common-Mode Input Range | Includes ground | — |
| Compensation | Internally frequency compensated | Internal (internally compensated) |
| Boîtier | 8-SOIC, 3.90 mm body width | 8-SOIC (DBV), 0.154 in (3.90 mm) width |
| Package Body Width | 3.90 mm | — |
| Packaging | Tape and reel | Tape and Reel (TR) |
| Type de montage | Surface mount | Surface Mount |
| Application Category | Automotive and industrial control systems | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Output Current | [DATA_NEEDED: output current] | — |
| Output Voltage Swing | [DATA_NEEDED: output voltage swing] | — |
| RoHS Compliance | [DATA_NEEDED: RoHS compliance status] | — |
| Amplifier Type | — | General Purpose, single-supply |
| Number of Circuits | — | 2 (independent channels) |
| Supply Voltage Range | — | 3 V to 26 V |
| Maximum Supply Voltage | — | 26 V |
| Gain Bandwidth Product | — | 700 kHz |
| Supply Current (per amplifier) | — | 0.7 mA typical |
| Common-Mode Rejection Ratio (CMRR) | — | 65 dB |
| Automotive Qualification | — | AEC-Q100 qualified |
| Nombre de broches | — | 8 |
| Output Swing | — | [DATA_NEEDED: output voltage swing] |
| Common-Mode Input Voltage Range | — | Includes ground; upper limit [DATA_NEEDED: common-mode input voltage range maximum] |
| Shutdown / Enable | — | None (no shutdown pin) |
| Statut RoHS | — | Compliant |