LM2904QDRG4 vs LM2904QDRG4Q1 Vergleich
Detaillierter Direktvergleich von LM2904QDRG4 von Texas Instruments und LM2904QDRG4Q1 von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
LM2904QDRG4Q1 - Dual 26 V AEC-Q100 Op Amp, 700 kHz, SOIC-8 | Texas Instruments
LM2904QDRG4Q1 ✓ AktivSpezifikationsvergleich
| Parameter | LM2904QDRG4 | LM2904QDRG4Q1 |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Product Type | Dual general-purpose operational amplifier | — |
| Number of Amplifier Channels | 2 circuits | — |
| Maximum Total Supply Voltage | 26 V | — |
| Recommended Single-Supply Operation | Up to 26 V | — |
| Recommended Dual-Supply Operation | ±13 V | — |
| Gain-Bandwidth Product | 700 kHz per channel | — |
| Slew Rate | 0.3 V/µs | 0.3 V/us |
| Typical Supply-Current Drain | 0.7 mA | — |
| Common-Mode Input Range | Includes ground | — |
| Compensation | Internally frequency compensated | Internal (internally compensated) |
| Gehäuse | 8-SOIC, 3.90 mm body width | 8-SOIC (DBV), 0.154 in (3.90 mm) width |
| Package Body Width | 3.90 mm | — |
| Packaging | Tape and reel | Tape and Reel (TR) |
| Montageart | Surface mount | Surface Mount |
| Application Category | Automotive and industrial control systems | — |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Output Current | [DATA_NEEDED: output current] | — |
| Output Voltage Swing | [DATA_NEEDED: output voltage swing] | — |
| RoHS Compliance | [DATA_NEEDED: RoHS compliance status] | — |
| Amplifier Type | — | General Purpose, single-supply |
| Number of Circuits | — | 2 (independent channels) |
| Supply Voltage Range | — | 3 V to 26 V |
| Maximum Supply Voltage | — | 26 V |
| Gain Bandwidth Product | — | 700 kHz |
| Supply Current (per amplifier) | — | 0.7 mA typical |
| Common-Mode Rejection Ratio (CMRR) | — | 65 dB |
| Automotive Qualification | — | AEC-Q100 qualified |
| Anzahl der Pins | — | 8 |
| Output Swing | — | [DATA_NEEDED: output voltage swing] |
| Common-Mode Input Voltage Range | — | Includes ground; upper limit [DATA_NEEDED: common-mode input voltage range maximum] |
| Shutdown / Enable | — | None (no shutdown pin) |
| RoHS-Status | — | Compliant |