LM339DTBR2G vs LM339PWG4 Comparison
Detailed side-by-side comparison of LM339DTBR2G by onsemi and LM339PWG4 by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | LM339DTBR2G | LM339PWG4 |
|---|---|---|
| Brand | onsemi | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Comparator Type | Quad differential comparator | 4 differential comparators |
| Number of Channels | 4 channels | — |
| Supply Voltage Range | 3 V to 36 V | — |
| Supply Configuration | Single supply | Single or dual supply |
| Output Type | Open collector | Open collector |
| Logic Compatibility | CMOS and TTL compatible | — |
| Operating Temperature Grade | Commercial temperature grade | — |
| Package | 14-pin TSSOP | 14-pin TSSOP |
| Mounting Type | Surface mount | Surface mount |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode voltage range] | Includes ground |
| Differential Input Voltage Range | [DATA_NEEDED: differential input voltage range] | Equal to maximum-rated supply voltage |
| Output Sink Current | [DATA_NEEDED: output sink current] | — |
| Output Pull-Up Requirement | [DATA_NEEDED: external pull-up resistor requirements] | — |
| Supply Current | [DATA_NEEDED: quiescent supply current] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Response Time | [DATA_NEEDED: comparator response time] | [DATA_NEEDED: response time] |
| RoHS Status | [DATA_NEEDED: RoHS compliance status] | — |
| REACH Status | [DATA_NEEDED: REACH compliance status] | — |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Comparator Channel Count | — | 4 channels |
| Maximum Supply Voltage Rating | — | 38 V |
| Operating Supply Voltage | — | 2 V to 36 V |
| Typical Supply-Current Drain | — | 0.8 mA |
| Typical Supply Current per Comparator | — | 200 uA |
| Low Input Offset Voltage | — | 0.37 mV |
| Low Input Bias Current | — | 3.5 nA |
| Output Compatibility | — | TTL, MOS, and CMOS compatible |
| Operating Temperature Range | — | 0 C to 70 C |
| ESD Rating HBM | — | 2 kV |
| Output Saturation Voltage | — | [DATA_NEEDED: output saturation voltage] |