LM339DTBR2G vs LM339PWG4 比較
詳細な並列比較: LM339DTBR2G メーカー: onsemi および LM339PWG4 メーカー: Texas Instruments。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
仕様比較
| パラメータ | LM339DTBR2G | LM339PWG4 |
|---|---|---|
| ブランド | onsemi | Texas Instruments |
| カテゴリ | Amplifier ICs | Amplifier ICs |
| ライフサイクル状態 | 有効 | 有効 |
| Comparator Type | Quad differential comparator | 4 differential comparators |
| Number of Channels | 4 channels | — |
| Supply Voltage Range | 3 V to 36 V | — |
| Supply Configuration | Single supply | Single or dual supply |
| 出力タイプ | Open collector | Open collector |
| Logic Compatibility | CMOS and TTL compatible | — |
| Operating Temperature Grade | Commercial temperature grade | — |
| パッケージ | 14-pin TSSOP | 14-pin TSSOP |
| 実装タイプ | Surface mount | Surface mount |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode voltage range] | Includes ground |
| Differential Input Voltage Range | [DATA_NEEDED: differential input voltage range] | Equal to maximum-rated supply voltage |
| Output Sink Current | [DATA_NEEDED: output sink current] | — |
| Output Pull-Up Requirement | [DATA_NEEDED: external pull-up resistor requirements] | — |
| 電源電流 | [DATA_NEEDED: quiescent supply current] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Response Time | [DATA_NEEDED: comparator response time] | [DATA_NEEDED: response time] |
| RoHS ステータス | [DATA_NEEDED: RoHS compliance status] | — |
| REACH Status | [DATA_NEEDED: REACH compliance status] | — |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Comparator Channel Count | — | 4 channels |
| Maximum Supply Voltage Rating | — | 38 V |
| 動作電源電圧 | — | 2 V to 36 V |
| Typical Supply-Current Drain | — | 0.8 mA |
| Typical Supply Current per Comparator | — | 200 uA |
| Low Input Offset Voltage | — | 0.37 mV |
| Low Input Bias Current | — | 3.5 nA |
| Output Compatibility | — | TTL, MOS, and CMOS compatible |
| 動作温度範囲 | — | 0 C to 70 C |
| ESD Rating HBM | — | 2 kV |
| Output Saturation Voltage | — | [DATA_NEEDED: output saturation voltage] |