LM339DTBR2G vs LM339PWG4 Comparaison
Comparaison détaillée côte à côte de LM339DTBR2G par onsemi et LM339PWG4 par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | LM339DTBR2G | LM339PWG4 |
|---|---|---|
| Marque | onsemi | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Comparator Type | Quad differential comparator | 4 differential comparators |
| Number of Channels | 4 channels | — |
| Supply Voltage Range | 3 V to 36 V | — |
| Supply Configuration | Single supply | Single or dual supply |
| Type de sortie | Open collector | Open collector |
| Logic Compatibility | CMOS and TTL compatible | — |
| Operating Temperature Grade | Commercial temperature grade | — |
| Boîtier | 14-pin TSSOP | 14-pin TSSOP |
| Type de montage | Surface mount | Surface mount |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode voltage range] | Includes ground |
| Differential Input Voltage Range | [DATA_NEEDED: differential input voltage range] | Equal to maximum-rated supply voltage |
| Output Sink Current | [DATA_NEEDED: output sink current] | — |
| Output Pull-Up Requirement | [DATA_NEEDED: external pull-up resistor requirements] | — |
| Courant d'alimentation | [DATA_NEEDED: quiescent supply current] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Response Time | [DATA_NEEDED: comparator response time] | [DATA_NEEDED: response time] |
| Statut RoHS | [DATA_NEEDED: RoHS compliance status] | — |
| REACH Status | [DATA_NEEDED: REACH compliance status] | — |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Comparator Channel Count | — | 4 channels |
| Maximum Supply Voltage Rating | — | 38 V |
| Tension d'alimentation de fonctionnement | — | 2 V to 36 V |
| Typical Supply-Current Drain | — | 0.8 mA |
| Typical Supply Current per Comparator | — | 200 uA |
| Low Input Offset Voltage | — | 0.37 mV |
| Low Input Bias Current | — | 3.5 nA |
| Output Compatibility | — | TTL, MOS, and CMOS compatible |
| Plage de température de fonctionnement | — | 0 C to 70 C |
| ESD Rating HBM | — | 2 kV |
| Output Saturation Voltage | — | [DATA_NEEDED: output saturation voltage] |