LM393 vs TS3702ID Comparison
Detailed side-by-side comparison of LM393 by Texas Instruments and TS3702ID by STMicroelectronics. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
STMicroelectronics
TS3702ID - Micropower Dual CMOS Comparator, 9uA, SOIC-8 | STMicroelectronics
TS3702ID ✓ ActiveSpecification Comparison
| Parameter | LM393 | TS3702ID |
|---|---|---|
| Brand | Texas Instruments | STMicroelectronics |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Comparator Channels | 2 (dual independent) | — |
| Supply Voltage Range (single) | 2 V to 30 V | — |
| Supply Voltage Range (split) | ±1 V to ±15 V | — |
| Input Offset Voltage | 2.0 mV (typical) | [DATA_NEEDED: input offset voltage] |
| Maximum Differential Input Voltage | ±38 V | — |
| Common-Mode Input Range | Includes ground (V-) | — |
| Output Type | Open-collector, rail-to-rail input capable | Push-pull CMOS |
| Logic Compatibility | TTL, MOS, CMOS (with external pull-up) | — |
| Supply Current (typical) | [DATA_NEEDED: supply current] | — |
| Response Time (typical) | [DATA_NEEDED: response time] | — |
| Operating Temperature Range | 0°C to +70°C (LM393 commercial grade) | -40 C to +125 C |
| Package | SOIC-8 (D suffix) | 8-pin SOIC-8 (SO-8), surface mount |
| Mounting Type | Surface Mount | — |
| Number of Pins | 8 | — |
| Extended Temperature Variant | LM293 (-25°C to +85°C), LM2903 (-40°C to +125°C) | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS declaration] |
| Number of Comparators | — | 2 |
| Comparator Type | — | General purpose voltage comparator |
| Supply Voltage Range (Single) | — | 2.7 V to 16 V |
| Supply Voltage Range (Dual) | — | +/-1.35 V to +/-8 V |
| Supply Current per Comparator | — | 9 uA typical |
| Input Impedance | — | 10^12 ohm typical |
| Input Offset Current | — | 1 pA typical |
| Response Time | — | 2.3 us typical |
| External Pull-up Resistor Required | — | No |
| Input Common-Mode Range | — | Includes GND |
| LM393 Compatibility | — | Pin-to-pin and functionally compatible with bipolar LM393 |
| Marking Code | — | 3702I |
| Output Saturation Voltage | — | [DATA_NEEDED: output saturation voltage] |
| Input Common-Mode Upper Limit | — | [DATA_NEEDED: upper input common-mode voltage] |