LM393 vs TS3702ID 비교
다음의 상세 나란히 비교: LM393 제조: Texas Instruments 및 TS3702ID 제조: STMicroelectronics. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
STMicroelectronics
TS3702ID - Micropower Dual CMOS Comparator, 9uA, SOIC-8 | STMicroelectronics
TS3702ID ✓ 활성사양 비교
| 파라미터 | LM393 | TS3702ID |
|---|---|---|
| 브랜드 | Texas Instruments | STMicroelectronics |
| 카테고리 | Amplifier ICs | Amplifier ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Comparator Channels | 2 (dual independent) | — |
| Supply Voltage Range (single) | 2 V to 30 V | — |
| Supply Voltage Range (split) | ±1 V to ±15 V | — |
| Input Offset Voltage | 2.0 mV (typical) | [DATA_NEEDED: input offset voltage] |
| Maximum Differential Input Voltage | ±38 V | — |
| Common-Mode Input Range | Includes ground (V-) | — |
| 출력 유형 | Open-collector, rail-to-rail input capable | Push-pull CMOS |
| Logic Compatibility | TTL, MOS, CMOS (with external pull-up) | — |
| Supply Current (typical) | [DATA_NEEDED: supply current] | — |
| Response Time (typical) | [DATA_NEEDED: response time] | — |
| 동작 온도 범위 | 0°C to +70°C (LM393 commercial grade) | -40 C to +125 C |
| 패키지 | SOIC-8 (D suffix) | 8-pin SOIC-8 (SO-8), surface mount |
| 실장 유형 | Surface Mount | — |
| 핀 수 | 8 | — |
| Extended Temperature Variant | LM293 (-25°C to +85°C), LM2903 (-40°C to +125°C) | — |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS declaration] |
| Number of Comparators | — | 2 |
| Comparator Type | — | General purpose voltage comparator |
| Supply Voltage Range (Single) | — | 2.7 V to 16 V |
| Supply Voltage Range (Dual) | — | +/-1.35 V to +/-8 V |
| Supply Current per Comparator | — | 9 uA typical |
| Input Impedance | — | 10^12 ohm typical |
| Input Offset Current | — | 1 pA typical |
| Response Time | — | 2.3 us typical |
| External Pull-up Resistor Required | — | No |
| Input Common-Mode Range | — | Includes GND |
| LM393 Compatibility | — | Pin-to-pin and functionally compatible with bipolar LM393 |
| Marking Code | — | 3702I |
| Output Saturation Voltage | — | [DATA_NEEDED: output saturation voltage] |
| Input Common-Mode Upper Limit | — | [DATA_NEEDED: upper input common-mode voltage] |