LM393 vs TS3702ID Karşılaştırma
Ayrıntılı yan yana karşılaştırma LM393 tarafından Texas Instruments ve TS3702ID tarafından STMicroelectronicsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
STMicroelectronics
TS3702ID - Micropower Dual CMOS Comparator, 9uA, SOIC-8 | STMicroelectronics
TS3702ID ✓ AktifÖzellik Karşılaştırması
| Parametre | LM393 | TS3702ID |
|---|---|---|
| Marka | Texas Instruments | STMicroelectronics |
| Kategori | Amplifier ICs | Amplifier ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Comparator Channels | 2 (dual independent) | — |
| Supply Voltage Range (single) | 2 V to 30 V | — |
| Supply Voltage Range (split) | ±1 V to ±15 V | — |
| Input Offset Voltage | 2.0 mV (typical) | [DATA_NEEDED: input offset voltage] |
| Maximum Differential Input Voltage | ±38 V | — |
| Common-Mode Input Range | Includes ground (V-) | — |
| Çıkış Türü | Open-collector, rail-to-rail input capable | Push-pull CMOS |
| Logic Compatibility | TTL, MOS, CMOS (with external pull-up) | — |
| Supply Current (typical) | [DATA_NEEDED: supply current] | — |
| Response Time (typical) | [DATA_NEEDED: response time] | — |
| İşletim Sıcaklığı Aralığı | 0°C to +70°C (LM393 commercial grade) | -40 C to +125 C |
| Paket | SOIC-8 (D suffix) | 8-pin SOIC-8 (SO-8), surface mount |
| Montaj Türü | Surface Mount | — |
| Pin Sayısı | 8 | — |
| Extended Temperature Variant | LM293 (-25°C to +85°C), LM2903 (-40°C to +125°C) | — |
| RoHS Durumu | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS declaration] |
| Number of Comparators | — | 2 |
| Comparator Type | — | General purpose voltage comparator |
| Supply Voltage Range (Single) | — | 2.7 V to 16 V |
| Supply Voltage Range (Dual) | — | +/-1.35 V to +/-8 V |
| Supply Current per Comparator | — | 9 uA typical |
| Input Impedance | — | 10^12 ohm typical |
| Input Offset Current | — | 1 pA typical |
| Response Time | — | 2.3 us typical |
| External Pull-up Resistor Required | — | No |
| Input Common-Mode Range | — | Includes GND |
| LM393 Compatibility | — | Pin-to-pin and functionally compatible with bipolar LM393 |
| Marking Code | — | 3702I |
| Output Saturation Voltage | — | [DATA_NEEDED: output saturation voltage] |
| Input Common-Mode Upper Limit | — | [DATA_NEEDED: upper input common-mode voltage] |