LPC4357JBD208K vs LPC4078FET208 Comparison
Detailed side-by-side comparison of LPC4357JBD208K by NXP Semiconductors and LPC4078FET208 by NXP Semiconductors. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
NXP Semiconductors
LPC4357JBD208K - ARM Cortex-M4/M0 MCU, 1MB Flash, 208-LQFP | NXP
LPC4357JBD208K ✓ ActiveNXP Semiconductors
LPC4078FET208 - 32-bit Arm Cortex-M4 MCU, 512KB Flash | NXP
LPC4078FET208 ✓ ActiveSpecification Comparison
| Parameter | LPC4357JBD208K | LPC4078FET208 |
|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors |
| Category | Microcontrollers | Microcontrollers |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $12.85 | $8.05 |
| Core Architecture | ARM Cortex-M4 (with FPU) + Cortex-M0 coprocessor | — |
| Bit Width | 32-bit | — |
| Number of Cores | 2 (dual-core asymmetric) | — |
| Maximum CPU Frequency | 204 MHz | 120 MHz |
| Program Memory (Flash) | 1 MB (1M x 8) | — |
| SRAM | 136 kB | 96 KB |
| EEPROM | 16 kB | 4 KB (emulated) |
| Supply Voltage | 3.3 V (typical) | 1.8 V to 3.6 V |
| Package | 208-LQFP (28x28 mm) | 208-TFBGA (15x15 mm) |
| Mounting Type | Surface Mount | — |
| High-Speed USB | 2 ports (one with on-chip HS PHY) | — |
| Ethernet | 10/100 MAC included | 10/100 MAC (MII/RMII) |
| Quad SPI Flash Interface (SPIFI) | Yes | — |
| External Memory Controller (EMC) | Yes (SRAM/SDRAM/NOR/NAND) | Yes (SRAM/NOR/SDRAM) |
| LCD Controller | Yes (STN/TFT) | — |
| State Configurable Timer (SCT) | Yes | — |
| Serial GPIO (SGPIO) | Yes | — |
| RoHS Status | Compliant | Compliant |
| Operating Temperature Grade | Industrial -40C to +105C (per 'K' suffix, [DATA_NEEDED: exact TA range]) | — |
| Core | — | Arm Cortex-M4 (with FPU and DSP) + Arm Cortex-M0 coprocessor |
| Flash Memory | — | 512 KB |
| Operating Temperature | — | -40 C to +85 C (industrial) |
| USB | — | USB 2.0 Host/Device/OTG + USB 2.0 Device/Host |
| CAN | — | 2x CAN 2.0B |
| UART | — | 4x UART |
| I2C | — | 3x (1x Fast-mode Plus 1 Mbit/s, 2x standard) |
| SSP/SPI | — | 3x SSP/SPI |
| I2S | — | 1x I2S audio interface |
| SPIFI (Quad-SPI) | — | Yes |
| ADC | — | 8-channel 10-bit |
| DAC | — | 1x 10-bit |
| Timers / PWM | — | 4 general-purpose timers + motor-control PWM |
| Debug | — | JTAG + SWD + ROM bootloader (UART/USB/SPI) |