LPC4357JBD208K vs LPC4078FET208 Vergleich
Detaillierter Direktvergleich von LPC4357JBD208K von NXP Semiconductors und LPC4078FET208 von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
NXP Semiconductors
LPC4357JBD208K - ARM Cortex-M4/M0 MCU, 1MB Flash, 208-LQFP | NXP
LPC4357JBD208K ✓ AktivNXP Semiconductors
LPC4078FET208 - 32-bit Arm Cortex-M4 MCU, 512KB Flash | NXP
LPC4078FET208 ✓ AktivSpezifikationsvergleich
| Parameter | LPC4357JBD208K | LPC4078FET208 |
|---|---|---|
| Marke | NXP Semiconductors | NXP Semiconductors |
| Kategorie | Microcontrollers | Microcontrollers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $12,85 | $8,05 |
| Core Architecture | ARM Cortex-M4 (with FPU) + Cortex-M0 coprocessor | — |
| Bit Width | 32-bit | — |
| Number of Cores | 2 (dual-core asymmetric) | — |
| Maximum CPU Frequency | 204 MHz | 120 MHz |
| Program Memory (Flash) | 1 MB (1M x 8) | — |
| SRAM | 136 kB | 96 KB |
| EEPROM | 16 kB | 4 KB (emulated) |
| Versorgungsspannung | 3.3 V (typical) | 1.8 V to 3.6 V |
| Gehäuse | 208-LQFP (28x28 mm) | 208-TFBGA (15x15 mm) |
| Montageart | Surface Mount | — |
| High-Speed USB | 2 ports (one with on-chip HS PHY) | — |
| Ethernet | 10/100 MAC included | 10/100 MAC (MII/RMII) |
| Quad SPI Flash Interface (SPIFI) | Yes | — |
| External Memory Controller (EMC) | Yes (SRAM/SDRAM/NOR/NAND) | Yes (SRAM/NOR/SDRAM) |
| LCD Controller | Yes (STN/TFT) | — |
| State Configurable Timer (SCT) | Yes | — |
| Serial GPIO (SGPIO) | Yes | — |
| RoHS-Status | Compliant | Compliant |
| Operating Temperature Grade | Industrial -40C to +105C (per 'K' suffix, [DATA_NEEDED: exact TA range]) | — |
| Core | — | Arm Cortex-M4 (with FPU and DSP) + Arm Cortex-M0 coprocessor |
| Flash Memory | — | 512 KB |
| Betriebstemperatur | — | -40 C to +85 C (industrial) |
| USB | — | USB 2.0 Host/Device/OTG + USB 2.0 Device/Host |
| CAN | — | 2x CAN 2.0B |
| UART | — | 4x UART |
| I2C | — | 3x (1x Fast-mode Plus 1 Mbit/s, 2x standard) |
| SSP/SPI | — | 3x SSP/SPI |
| I2S | — | 1x I2S audio interface |
| SPIFI (Quad-SPI) | — | Yes |
| ADC | — | 8-channel 10-bit |
| DAC | — | 1x 10-bit |
| Timers / PWM | — | 4 general-purpose timers + motor-control PWM |
| Debug | — | JTAG + SWD + ROM bootloader (UART/USB/SPI) |