LPC4357JBD208K vs LPC4078FET208 Comparación
Comparación detallada lado a lado de LPC4357JBD208K por NXP Semiconductors y LPC4078FET208 por NXP Semiconductors. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
NXP Semiconductors
LPC4357JBD208K - ARM Cortex-M4/M0 MCU, 1MB Flash, 208-LQFP | NXP
LPC4357JBD208K ✓ ActivoNXP Semiconductors
LPC4078FET208 - 32-bit Arm Cortex-M4 MCU, 512KB Flash | NXP
LPC4078FET208 ✓ ActivoComparación de especificaciones
| Parámetro | LPC4357JBD208K | LPC4078FET208 |
|---|---|---|
| Marca | NXP Semiconductors | NXP Semiconductors |
| Categoría | Microcontrollers | Microcontrollers |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $12,85 | $8,05 |
| Core Architecture | ARM Cortex-M4 (with FPU) + Cortex-M0 coprocessor | — |
| Bit Width | 32-bit | — |
| Number of Cores | 2 (dual-core asymmetric) | — |
| Maximum CPU Frequency | 204 MHz | 120 MHz |
| Program Memory (Flash) | 1 MB (1M x 8) | — |
| SRAM | 136 kB | 96 KB |
| EEPROM | 16 kB | 4 KB (emulated) |
| Tensión de alimentación | 3.3 V (typical) | 1.8 V to 3.6 V |
| Encapsulado | 208-LQFP (28x28 mm) | 208-TFBGA (15x15 mm) |
| Tipo de montaje | Surface Mount | — |
| High-Speed USB | 2 ports (one with on-chip HS PHY) | — |
| Ethernet | 10/100 MAC included | 10/100 MAC (MII/RMII) |
| Quad SPI Flash Interface (SPIFI) | Yes | — |
| External Memory Controller (EMC) | Yes (SRAM/SDRAM/NOR/NAND) | Yes (SRAM/NOR/SDRAM) |
| LCD Controller | Yes (STN/TFT) | — |
| State Configurable Timer (SCT) | Yes | — |
| Serial GPIO (SGPIO) | Yes | — |
| Estado RoHS | Compliant | Compliant |
| Operating Temperature Grade | Industrial -40C to +105C (per 'K' suffix, [DATA_NEEDED: exact TA range]) | — |
| Core | — | Arm Cortex-M4 (with FPU and DSP) + Arm Cortex-M0 coprocessor |
| Flash Memory | — | 512 KB |
| Temperatura de funcionamiento | — | -40 C to +85 C (industrial) |
| USB | — | USB 2.0 Host/Device/OTG + USB 2.0 Device/Host |
| CAN | — | 2x CAN 2.0B |
| UART | — | 4x UART |
| I2C | — | 3x (1x Fast-mode Plus 1 Mbit/s, 2x standard) |
| SSP/SPI | — | 3x SSP/SPI |
| I2S | — | 1x I2S audio interface |
| SPIFI (Quad-SPI) | — | Yes |
| ADC | — | 8-channel 10-bit |
| DAC | — | 1x 10-bit |
| Timers / PWM | — | 4 general-purpose timers + motor-control PWM |
| Debug | — | JTAG + SWD + ROM bootloader (UART/USB/SPI) |