LT1102ACH vs LT1102CH Comparison
Detailed side-by-side comparison of LT1102ACH by Analog Devices and LT1102CH by Analog Devices. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | LT1102ACH | LT1102CH |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Obsolete | Active |
| Product Type | Single-circuit instrumentation amplifier | Instrumentation Amplifier, JFET input |
| Input Transistor Technology | JFET input | — |
| Fixed Gain Options | 10 or 100 V/V | — |
| Gain Accuracy | 0.01% | 0.01% |
| Nonlinearity | 3 ppm | — |
| Input Offset Voltage | 180 µV | 180 uV |
| Input Bias Current | <10 pA | < 10 pA |
| Slew Rate | 30 V/µs | [DATA_NEEDED: slew rate] |
| Gain-Bandwidth Product | [DATA_NEEDED: gain-bandwidth product] | [DATA_NEEDED: gain-bandwidth product] |
| Settling Time | [DATA_NEEDED: settling time] | [DATA_NEEDED: settling time] |
| Overdrive Recovery Time | [DATA_NEEDED: overdrive recovery time] | [DATA_NEEDED: overdrive recovery time] |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | — |
| Operating Temperature Range | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range for LT1102CH] |
| Package | TO-5 metal can, 8 pins | TO-5, 8-lead hermetic metal can (CH) |
| Pin Count | 8 pins | — |
| Mounting Type | Through-hole | Through-hole, hermetic sealed |
| External Gain-Setting Resistor | Not required | — |
| Output Offset Voltage Contribution | None | — |
| Input Bias Current Temperature Behavior | Does not double for each 10°C temperature increase | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Number of Channels | — | 1 |
| Internal Gain Options | — | 10 or 100 (fixed) |
| Non-Linearity | — | 3 ppm |
| Input Offset Current | — | < 10 pA |
| Supply Voltage Range (differential) | — | +/-9 V to +/-20 V |
| Typical Dual Supply Rails | — | +/-12 V, +/-15 V, +/-18 V |
| External Gain-Setting Resistor Required | — | No |
| Input Stage Topology | — | FET (JFET) differential input |
| Common-Mode Rejection | — | [DATA_NEEDED: CMRR] |
| Input Noise Density | — | [DATA_NEEDED: input noise density] |
| Supply Current per Amplifier | — | [DATA_NEEDED: supply current] |