LT1102ACH vs LT1102CH Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci LT1102ACH disebabkan oleh Analog Devices dan LT1102CH disebabkan oleh Analog Devices. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Pengandingan Spesifikasi
| Parametr | LT1102ACH | LT1102CH |
|---|---|---|
| Merek | Analog Devices | Analog Devices |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Obsolete | Aktif |
| Product Type | Single-circuit instrumentation amplifier | Instrumentation Amplifier, JFET input |
| Input Transistor Technology | JFET input | — |
| Fixed Gain Options | 10 or 100 V/V | — |
| Gain Accuracy | 0.01% | 0.01% |
| Nonlinearity | 3 ppm | — |
| Input Offset Voltage | 180 µV | 180 uV |
| Input Bias Current | <10 pA | < 10 pA |
| Slew Rate | 30 V/µs | [DATA_NEEDED: slew rate] |
| Gain-Bandwidth Product | [DATA_NEEDED: gain-bandwidth product] | [DATA_NEEDED: gain-bandwidth product] |
| Settling Time | [DATA_NEEDED: settling time] | [DATA_NEEDED: settling time] |
| Overdrive Recovery Time | [DATA_NEEDED: overdrive recovery time] | [DATA_NEEDED: overdrive recovery time] |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | — |
| Gambaran Suhu Operasi | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range for LT1102CH] |
| Kemasan | TO-5 metal can, 8 pins | TO-5, 8-lead hermetic metal can (CH) |
| Kiraan Pin | 8 pins | — |
| Jenis Pemasangan | Through-hole | Through-hole, hermetic sealed |
| External Gain-Setting Resistor | Not required | — |
| Output Offset Voltage Contribution | None | — |
| Input Bias Current Temperature Behavior | Does not double for each 10°C temperature increase | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Number of Channels | — | 1 |
| Internal Gain Options | — | 10 or 100 (fixed) |
| Non-Linearity | — | 3 ppm |
| Input Offset Current | — | < 10 pA |
| Supply Voltage Range (differential) | — | +/-9 V to +/-20 V |
| Typical Dual Supply Rails | — | +/-12 V, +/-15 V, +/-18 V |
| External Gain-Setting Resistor Required | — | No |
| Input Stage Topology | — | FET (JFET) differential input |
| Common-Mode Rejection | — | [DATA_NEEDED: CMRR] |
| Input Noise Density | — | [DATA_NEEDED: input noise density] |
| Supply Current per Amplifier | — | [DATA_NEEDED: supply current] |