LT1102ACH vs LT1102CH So sánh
So sánh chi tiết song song của LT1102ACH bằng Analog Devices và LT1102CH bằng Analog Devices. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.
Analog Devices
LT1102CH - 10/100 Gain JFET Instrumentation Amp | Analog Devices
LT1102CH ✓ Hoạt độngSo sánh thông số kỹ thuật
| Tham số | LT1102ACH | LT1102CH |
|---|---|---|
| Thương hiệu | Analog Devices | Analog Devices |
| Danh mục | Amplifier ICs | Amplifier ICs |
| Trạng thái vòng đời | Obsolete | Hoạt động |
| Product Type | Single-circuit instrumentation amplifier | Instrumentation Amplifier, JFET input |
| Input Transistor Technology | JFET input | — |
| Fixed Gain Options | 10 or 100 V/V | — |
| Gain Accuracy | 0.01% | 0.01% |
| Nonlinearity | 3 ppm | — |
| Input Offset Voltage | 180 µV | 180 uV |
| Input Bias Current | <10 pA | < 10 pA |
| Slew Rate | 30 V/µs | [DATA_NEEDED: slew rate] |
| Gain-Bandwidth Product | [DATA_NEEDED: gain-bandwidth product] | [DATA_NEEDED: gain-bandwidth product] |
| Settling Time | [DATA_NEEDED: settling time] | [DATA_NEEDED: settling time] |
| Overdrive Recovery Time | [DATA_NEEDED: overdrive recovery time] | [DATA_NEEDED: overdrive recovery time] |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | — |
| Khoảng nhiệt độ hoạt động | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range for LT1102CH] |
| Hộp | TO-5 metal can, 8 pins | TO-5, 8-lead hermetic metal can (CH) |
| Số chân | 8 pins | — |
| Kiểu lắp đặt | Through-hole | Through-hole, hermetic sealed |
| External Gain-Setting Resistor | Not required | — |
| Output Offset Voltage Contribution | None | — |
| Input Bias Current Temperature Behavior | Does not double for each 10°C temperature increase | — |
| Trạng thái RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Number of Channels | — | 1 |
| Internal Gain Options | — | 10 or 100 (fixed) |
| Non-Linearity | — | 3 ppm |
| Input Offset Current | — | < 10 pA |
| Supply Voltage Range (differential) | — | +/-9 V to +/-20 V |
| Typical Dual Supply Rails | — | +/-12 V, +/-15 V, +/-18 V |
| External Gain-Setting Resistor Required | — | No |
| Input Stage Topology | — | FET (JFET) differential input |
| Common-Mode Rejection | — | [DATA_NEEDED: CMRR] |
| Input Noise Density | — | [DATA_NEEDED: input noise density] |
| Supply Current per Amplifier | — | [DATA_NEEDED: supply current] |