MAX232ACSE+T vs ADM232LJRZ Comparison
Detailed side-by-side comparison of MAX232ACSE+T by Analog Devices and ADM232LJRZ by Analog Devices. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Analog Devices
MAX232ACSE+T - 5V RS-232 Transceiver, 2 Driver/2 Receiver | Maxim Integrated
MAX232ACSE+T ✓ ActiveAnalog Devices
ADM232LJRZ - 2/2 RS-232 Transceiver, 5V, 120kbps | Analog Devices
ADM232LJRZ ✓ ActiveSpecification Comparison
| Parameter | MAX232ACSE+T | ADM232LJRZ |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Category | Interface ICs | Interface ICs |
| Lifecycle Status | Active | Active |
| Function | RS-232 Transceiver (2 Driver / 2 Receiver) | — |
| Data Rate | 200 kbps | — |
| Supply Voltage | 4.5 V to 5.5 V | — |
| Number of Drivers | 2 | — |
| Number of Receivers | 2 | — |
| Duplex | Full | — |
| Receiver Input Voltage Range | ±30 V (HBM ESD tolerance on RS-232 inputs) | — |
| Operating Temperature | 0 °C to +70 °C (C grade) | — |
| Package | 16-SOIC (NSOIC, narrow body, 0.154" / 3.90 mm width) | 16-pin SOIC, 7.50 mm width |
| Mounting Type | Surface Mount | Surface mount |
| Charge Pump Capacitors | 4 x 0.1 µF external (typical) | — |
| Shutdown Mode | Yes (active-low, device-dependent) | — |
| RoHS Status | Compliant | [DATA_NEEDED: RoHS status] |
| MSL Level | [DATA_NEEDED: MSL level] | — |
| Packaging | Tape & Reel (+T suffix) | — |
| Transceiver Configuration | — | 2 drivers / 2 receivers |
| Interface Type | — | Full-duplex RS-232 |
| Supply Voltage Range | — | 4.5 V to 5.5 V |
| Nominal Supply Voltage | — | 5 V |
| Maximum Data Rate | — | 120 kbps |
| Transmitter Output Swing | — | ±9 V from a 5 V supply |
| Charge-Pump Capacitor Value | — | 1 µF |
| Protocol Compliance | — | EIA-232-E and V.28 |
| Shipping Packaging | — | Tube |
| On-Board DC-to-DC Converter | — | Yes |
| Logic Compatibility | — | CMOS |
| Operating Temperature Range | — | [DATA_NEEDED: operating temperature range] |
| Supply Current | — | [DATA_NEEDED: supply current] |
| Receiver Input Resistance | — | [DATA_NEEDED: receiver input resistance] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |