MAX232ACSE+T vs ADM232LJRZ 比較

詳細な並列比較: MAX232ACSE+T メーカー: Analog Devices および ADM232LJRZ メーカー: Analog Devices。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。

仕様比較

パラメータ MAX232ACSE+T ADM232LJRZ
ブランド Analog Devices Analog Devices
カテゴリ Interface ICs Interface ICs
ライフサイクル状態 有効 有効
機能 RS-232 Transceiver (2 Driver / 2 Receiver) —
データレート 200 kbps —
電源電圧 4.5 V to 5.5 V —
Number of Drivers 2 —
Number of Receivers 2 —
Duplex Full —
Receiver Input Voltage Range ±30 V (HBM ESD tolerance on RS-232 inputs) —
動作温度 0 °C to +70 °C (C grade) —
パッケージ 16-SOIC (NSOIC, narrow body, 0.154" / 3.90 mm width) 16-pin SOIC, 7.50 mm width
実装タイプ Surface Mount Surface mount
Charge Pump Capacitors 4 x 0.1 µF external (typical) —
Shutdown Mode Yes (active-low, device-dependent) —
RoHS ステータス Compliant [DATA_NEEDED: RoHS status]
MSLレベル [DATA_NEEDED: MSL level] —
Packaging Tape & Reel (+T suffix) —
Transceiver Configuration — 2 drivers / 2 receivers
インターフェースタイプ — Full-duplex RS-232
Supply Voltage Range — 4.5 V to 5.5 V
Nominal Supply Voltage — 5 V
Maximum Data Rate — 120 kbps
Transmitter Output Swing — ±9 V from a 5 V supply
Charge-Pump Capacitor Value — 1 µF
Protocol Compliance — EIA-232-E and V.28
Shipping Packaging — Tube
On-Board DC-to-DC Converter — Yes
Logic Compatibility — CMOS
動作温度範囲 — [DATA_NEEDED: operating temperature range]
電源電流 — [DATA_NEEDED: supply current]
Receiver Input Resistance — [DATA_NEEDED: receiver input resistance]
REACH Status — [DATA_NEEDED: REACH status]
Lead-Free Status — [DATA_NEEDED: lead-free status]

データシート&リソース

すべての製品を閲覧 BOMを作成 見積もり依頼