MAX232ACSE+T vs ADM232LJRZ 比較

詳細並排比較 MAX232ACSE+T 由 Analog Devices 與 ADM232LJRZ 由 Analog Devices. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。

規格比較

參數 MAX232ACSE+T ADM232LJRZ
品牌 Analog Devices Analog Devices
類別 Interface ICs Interface ICs
生命週期狀態 啟用中 啟用中
功能 RS-232 Transceiver (2 Driver / 2 Receiver) —
資料速率 200 kbps —
供應電壓 4.5 V to 5.5 V —
Number of Drivers 2 —
Number of Receivers 2 —
Duplex Full —
Receiver Input Voltage Range ±30 V (HBM ESD tolerance on RS-232 inputs) —
工作溫度 0 °C to +70 °C (C grade) —
封裝 16-SOIC (NSOIC, narrow body, 0.154" / 3.90 mm width) 16-pin SOIC, 7.50 mm width
安裝類型 Surface Mount Surface mount
Charge Pump Capacitors 4 x 0.1 µF external (typical) —
Shutdown Mode Yes (active-low, device-dependent) —
RoHS 狀態 Compliant [DATA_NEEDED: RoHS status]
MSL 等級 [DATA_NEEDED: MSL level] —
Packaging Tape & Reel (+T suffix) —
Transceiver Configuration — 2 drivers / 2 receivers
介面類型 — Full-duplex RS-232
Supply Voltage Range — 4.5 V to 5.5 V
Nominal Supply Voltage — 5 V
Maximum Data Rate — 120 kbps
Transmitter Output Swing — ±9 V from a 5 V supply
Charge-Pump Capacitor Value — 1 µF
Protocol Compliance — EIA-232-E and V.28
Shipping Packaging — Tube
On-Board DC-to-DC Converter — Yes
Logic Compatibility — CMOS
工作溫度範圍 — [DATA_NEEDED: operating temperature range]
供應電流 — [DATA_NEEDED: supply current]
Receiver Input Resistance — [DATA_NEEDED: receiver input resistance]
REACH Status — [DATA_NEEDED: REACH status]
Lead-Free Status — [DATA_NEEDED: lead-free status]

資料表與資源

瀏覽所有產品 建立 BOM 索取報價