MAX232ECDWRE4 vs MAX232ECDWRG4 Comparison
Detailed side-by-side comparison of MAX232ECDWRE4 by Texas Instruments and MAX232ECDWRG4 by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
MAX232ECDWRE4 - 250kbps Dual RS-232 Transceiver | Texas Instruments
MAX232ECDWRE4 ✓ ActiveSpecification Comparison
| Parameter | MAX232ECDWRE4 | MAX232ECDWRG4 |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Interface ICs | Interface ICs |
| Lifecycle Status | Active | Active |
| Product Type | Dual RS-232 driver and receiver transceiver | — |
| Number of Drivers | 2 | 2 drivers |
| Number of Receivers | 2 | 2 receivers |
| Operating Mode | Full duplex | — |
| Supply Voltage Range | 4.5 V to 5.5 V | — |
| Nominal Supply Voltage | 5 V | — |
| Maximum Data Rate | 250 kbps | — |
| Interface Standard | TIA/EIA-232-F | — |
| Logic-Level Interface | 5 V TTL/CMOS | — |
| Charge-Pump Capacitors | 4 external capacitors | — |
| HBM ESD Protection | 15 kV on all RS-232 pins | — |
| IEC 61000-4-2 Air-Gap ESD Protection | 15 kV on all RS-232 pins | — |
| IEC 61000-4-2 Contact Discharge Protection | 8 kV on RS-232 pins | — |
| Package | 16-SOIC, 7.50 mm width | — |
| Terminal Count | 16 terminals | — |
| Terminal Form | Gull wing | — |
| Mounting Type | Surface mount | Surface mount |
| Temperature Grade | Commercial | — |
| Interface Type | — | RS-232 transceiver |
| Data Rate | — | 120 kbit/s |
| Supply Voltage | — | 5 V |
| Charge-Pump Capacitor Value | — | 1.0 uF each |
| Receiver Input Voltage Range | — | -30 V to +30 V |
| ESD Protection Standard | — | IEC 61000-4-2 |
| RS-232 Compliance | — | TIA/RS-232-F and ITU Recommendation V.28 |
| Package Pin Count | — | 16 pins |
| Package Type | — | 16-pin SOIC |
| Operating Temperature Range | — | 0 C to +70 C |
| Supply Current | — | [DATA_NEEDED: supply current] |
| Driver Output Voltage | — | [DATA_NEEDED: driver output voltage] |
| Receiver Input Resistance | — | [DATA_NEEDED: receiver input resistance] |