MAX232ECDWRE4 vs MAX232ECDWRG4 Comparaison
Comparaison détaillée côte à côte de MAX232ECDWRE4 par Texas Instruments et MAX232ECDWRG4 par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
MAX232ECDWRE4 - 250kbps Dual RS-232 Transceiver | Texas Instruments
MAX232ECDWRE4 ✓ ActifComparaison des spécifications
| Paramètre | MAX232ECDWRE4 | MAX232ECDWRG4 |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | Dual RS-232 driver and receiver transceiver | — |
| Number of Drivers | 2 | 2 drivers |
| Number of Receivers | 2 | 2 receivers |
| Operating Mode | Full duplex | — |
| Supply Voltage Range | 4.5 V to 5.5 V | — |
| Nominal Supply Voltage | 5 V | — |
| Maximum Data Rate | 250 kbps | — |
| Interface Standard | TIA/EIA-232-F | — |
| Logic-Level Interface | 5 V TTL/CMOS | — |
| Charge-Pump Capacitors | 4 external capacitors | — |
| HBM ESD Protection | 15 kV on all RS-232 pins | — |
| IEC 61000-4-2 Air-Gap ESD Protection | 15 kV on all RS-232 pins | — |
| IEC 61000-4-2 Contact Discharge Protection | 8 kV on RS-232 pins | — |
| Boîtier | 16-SOIC, 7.50 mm width | — |
| Terminal Count | 16 terminals | — |
| Terminal Form | Gull wing | — |
| Type de montage | Surface mount | Surface mount |
| Temperature Grade | Commercial | — |
| Type d'interface | — | RS-232 transceiver |
| Débit de données | — | 120 kbit/s |
| Tension d'alimentation | — | 5 V |
| Charge-Pump Capacitor Value | — | 1.0 uF each |
| Receiver Input Voltage Range | — | -30 V to +30 V |
| ESD Protection Standard | — | IEC 61000-4-2 |
| RS-232 Compliance | — | TIA/RS-232-F and ITU Recommendation V.28 |
| Package Pin Count | — | 16 pins |
| Package Type | — | 16-pin SOIC |
| Plage de température de fonctionnement | — | 0 C to +70 C |
| Courant d'alimentation | — | [DATA_NEEDED: supply current] |
| Driver Output Voltage | — | [DATA_NEEDED: driver output voltage] |
| Receiver Input Resistance | — | [DATA_NEEDED: receiver input resistance] |