MAX232ECDWRE4 vs MAX232ECDWRG4 Karşılaştırma
Ayrıntılı yan yana karşılaştırma MAX232ECDWRE4 tarafından Texas Instruments ve MAX232ECDWRG4 tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Texas Instruments
MAX232ECDWRE4 - 250kbps Dual RS-232 Transceiver | Texas Instruments
MAX232ECDWRE4 ✓ AktifÖzellik Karşılaştırması
| Parametre | MAX232ECDWRE4 | MAX232ECDWRG4 |
|---|---|---|
| Marka | Texas Instruments | Texas Instruments |
| Kategori | Interface ICs | Interface ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Product Type | Dual RS-232 driver and receiver transceiver | — |
| Number of Drivers | 2 | 2 drivers |
| Number of Receivers | 2 | 2 receivers |
| Operating Mode | Full duplex | — |
| Supply Voltage Range | 4.5 V to 5.5 V | — |
| Nominal Supply Voltage | 5 V | — |
| Maximum Data Rate | 250 kbps | — |
| Interface Standard | TIA/EIA-232-F | — |
| Logic-Level Interface | 5 V TTL/CMOS | — |
| Charge-Pump Capacitors | 4 external capacitors | — |
| HBM ESD Protection | 15 kV on all RS-232 pins | — |
| IEC 61000-4-2 Air-Gap ESD Protection | 15 kV on all RS-232 pins | — |
| IEC 61000-4-2 Contact Discharge Protection | 8 kV on RS-232 pins | — |
| Paket | 16-SOIC, 7.50 mm width | — |
| Terminal Count | 16 terminals | — |
| Terminal Form | Gull wing | — |
| Montaj Türü | Surface mount | Surface mount |
| Temperature Grade | Commercial | — |
| Arayüz Türü | — | RS-232 transceiver |
| Veri Hızı | — | 120 kbit/s |
| Besleme Gerilimi | — | 5 V |
| Charge-Pump Capacitor Value | — | 1.0 uF each |
| Receiver Input Voltage Range | — | -30 V to +30 V |
| ESD Protection Standard | — | IEC 61000-4-2 |
| RS-232 Compliance | — | TIA/RS-232-F and ITU Recommendation V.28 |
| Package Pin Count | — | 16 pins |
| Package Type | — | 16-pin SOIC |
| İşletim Sıcaklığı Aralığı | — | 0 C to +70 C |
| Besleme Akımı | — | [DATA_NEEDED: supply current] |
| Driver Output Voltage | — | [DATA_NEEDED: driver output voltage] |
| Receiver Input Resistance | — | [DATA_NEEDED: receiver input resistance] |