MAX232EEPE+ vs MAX232ECPE+ Comparison

Detailed side-by-side comparison of MAX232EEPE+ by Analog Devices and MAX232ECPE+ by Analog Devices. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.

Analog Devices
MAX232EEPE+ MAX232EEPE+ - 120kbps RS-232 Transceiver | Analog Devices

MAX232EEPE+ - 120kbps RS-232 Transceiver | Analog Devices

MAX232EEPE+ ✓ Active
Analog Devices
MAX232ECPE+ MAX232ECPE+ - 120kbps 5V RS-232 Transceiver | Analog Devices

MAX232ECPE+ - 120kbps 5V RS-232 Transceiver | Analog Devices

MAX232ECPE+ ✓ Active

Specification Comparison

Parameter MAX232EEPE+ MAX232ECPE+
Brand Analog Devices Analog Devices
Category Interface ICs Interface ICs
Lifecycle Status Active Active
Product Type RS-232 transceiver —
Supply Voltage 5 V —
Transmitter Count 2 —
Receiver Count 2 —
Maximum Data Rate 120 kbps 120kbps
ESD Protection 15 kV 15kV HBM
Interface Standard EIA/TIA-232E and CCITT V.28 —
Package 16-pin PDIP 16-pin PDIP, 0.300 inch, 7.62mm
Pin Count 16 pins —
Mounting Type Through-hole DIP Through-hole
Logic Compatibility TTL/CMOS-compatible RS-232 interface TTL/CMOS interface
Power-Supply Topology Single 5 V supply with integrated RS-232 charge-pump voltage generation —
Operating Temperature Range [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Supply Current [DATA_NEEDED: typical and maximum supply current] —
Transmitter Output Levels [DATA_NEEDED: RS-232 output voltage levels] —
Receiver Input Threshold [DATA_NEEDED: receiver threshold and hysteresis] —
RoHS Status [DATA_NEEDED: RoHS compliance status] unknown
REACH Status [DATA_NEEDED: REACH compliance status] unknown
Lead-Free Status [DATA_NEEDED: lead-free status] —
Device Type — Dual RS-232 transceiver
Transmit Channels — 2
Receive Channels — 2
Supply Voltage Range — 4.5V to 5.5V
Supported Standards — EIA/TIA-232E and CCITT V.28
Charge Pump — Integrated charge-pump circuitry
Negative Supply Requirement — No separate negative supply; external capacitors required
Driver Output Voltage — [DATA_NEEDED: RS-232 driver output voltage]
Receiver Input Voltage Range — [DATA_NEEDED: RS-232 receiver input voltage range]
Propagation Delay — [DATA_NEEDED: propagation delay]
Quiescent Current — [DATA_NEEDED: quiescent current]
External Charge-Pump Capacitors — [DATA_NEEDED: charge-pump capacitor values]
AEC-Q100 Qualification — not_applicable

Datasheets & Resources

Browse All Products Create BOM Request Quote