MAX232EEPE+ vs MAX232ECPE+ So sánh

So sánh chi tiết song song của MAX232EEPE+ bằng Analog Devices và MAX232ECPE+ bằng Analog Devices. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Analog Devices
MAX232EEPE+ MAX232EEPE+ - 120kbps RS-232 Transceiver | Analog Devices

MAX232EEPE+ - 120kbps RS-232 Transceiver | Analog Devices

MAX232EEPE+ ✓ Hoạt động
Analog Devices
MAX232ECPE+ MAX232ECPE+ - 120kbps 5V RS-232 Transceiver | Analog Devices

MAX232ECPE+ - 120kbps 5V RS-232 Transceiver | Analog Devices

MAX232ECPE+ ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số MAX232EEPE+ MAX232ECPE+
Thương hiệu Analog Devices Analog Devices
Danh mục Interface ICs Interface ICs
Trạng thái vòng đời Hoạt động Hoạt động
Product Type RS-232 transceiver —
Điện áp cung cấp 5 V —
Transmitter Count 2 —
Receiver Count 2 —
Maximum Data Rate 120 kbps 120kbps
ESD Protection 15 kV 15kV HBM
Interface Standard EIA/TIA-232E and CCITT V.28 —
Hộp 16-pin PDIP 16-pin PDIP, 0.300 inch, 7.62mm
Số chân 16 pins —
Kiểu lắp đặt Through-hole DIP Through-hole
Logic Compatibility TTL/CMOS-compatible RS-232 interface TTL/CMOS interface
Power-Supply Topology Single 5 V supply with integrated RS-232 charge-pump voltage generation —
Khoảng nhiệt độ hoạt động [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Điện áp cung cấp [DATA_NEEDED: typical and maximum supply current] —
Transmitter Output Levels [DATA_NEEDED: RS-232 output voltage levels] —
Receiver Input Threshold [DATA_NEEDED: receiver threshold and hysteresis] —
Trạng thái RoHS [DATA_NEEDED: RoHS compliance status] unknown
REACH Status [DATA_NEEDED: REACH compliance status] unknown
Lead-Free Status [DATA_NEEDED: lead-free status] —
Device Type — Dual RS-232 transceiver
Transmit Channels — 2
Receive Channels — 2
Supply Voltage Range — 4.5V to 5.5V
Supported Standards — EIA/TIA-232E and CCITT V.28
Charge Pump — Integrated charge-pump circuitry
Negative Supply Requirement — No separate negative supply; external capacitors required
Driver Output Voltage — [DATA_NEEDED: RS-232 driver output voltage]
Receiver Input Voltage Range — [DATA_NEEDED: RS-232 receiver input voltage range]
Propagation Delay — [DATA_NEEDED: propagation delay]
Điện áp yên tĩnh — [DATA_NEEDED: quiescent current]
External Charge-Pump Capacitors — [DATA_NEEDED: charge-pump capacitor values]
AEC-Q100 Qualification — not_applicable

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá