MAX232EEPE+ vs MAX232ECPE+ Comparación

Comparación detallada lado a lado de MAX232EEPE+ por Analog Devices y MAX232ECPE+ por Analog Devices. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.

Analog Devices
MAX232EEPE+ MAX232EEPE+ - 120kbps RS-232 Transceiver | Analog Devices

MAX232EEPE+ - 120kbps RS-232 Transceiver | Analog Devices

MAX232EEPE+ ✓ Activo
Analog Devices
MAX232ECPE+ MAX232ECPE+ - 120kbps 5V RS-232 Transceiver | Analog Devices

MAX232ECPE+ - 120kbps 5V RS-232 Transceiver | Analog Devices

MAX232ECPE+ ✓ Activo

Comparación de especificaciones

Parámetro MAX232EEPE+ MAX232ECPE+
Marca Analog Devices Analog Devices
Categoría Interface ICs Interface ICs
Estado del ciclo de vida Activo Activo
Product Type RS-232 transceiver —
Tensión de alimentación 5 V —
Transmitter Count 2 —
Receiver Count 2 —
Maximum Data Rate 120 kbps 120kbps
ESD Protection 15 kV 15kV HBM
Interface Standard EIA/TIA-232E and CCITT V.28 —
Encapsulado 16-pin PDIP 16-pin PDIP, 0.300 inch, 7.62mm
Recuento de pines 16 pins —
Tipo de montaje Through-hole DIP Through-hole
Logic Compatibility TTL/CMOS-compatible RS-232 interface TTL/CMOS interface
Power-Supply Topology Single 5 V supply with integrated RS-232 charge-pump voltage generation —
Rango de temperatura de funcionamiento [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Corriente de alimentación [DATA_NEEDED: typical and maximum supply current] —
Transmitter Output Levels [DATA_NEEDED: RS-232 output voltage levels] —
Receiver Input Threshold [DATA_NEEDED: receiver threshold and hysteresis] —
Estado RoHS [DATA_NEEDED: RoHS compliance status] unknown
REACH Status [DATA_NEEDED: REACH compliance status] unknown
Lead-Free Status [DATA_NEEDED: lead-free status] —
Device Type — Dual RS-232 transceiver
Transmit Channels — 2
Receive Channels — 2
Supply Voltage Range — 4.5V to 5.5V
Supported Standards — EIA/TIA-232E and CCITT V.28
Charge Pump — Integrated charge-pump circuitry
Negative Supply Requirement — No separate negative supply; external capacitors required
Driver Output Voltage — [DATA_NEEDED: RS-232 driver output voltage]
Receiver Input Voltage Range — [DATA_NEEDED: RS-232 receiver input voltage range]
Propagation Delay — [DATA_NEEDED: propagation delay]
Corriente en reposo — [DATA_NEEDED: quiescent current]
External Charge-Pump Capacitors — [DATA_NEEDED: charge-pump capacitor values]
AEC-Q100 Qualification — not_applicable

Hojas de datos y recursos

Examinar todos los productos Crear BOM Solicitar cotización