MC33072PG vs TL072CP Comparison
Detailed side-by-side comparison of MC33072PG by onsemi and TL072CP by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
TL072CP - Dual JFET-Input Low-Noise Op Amp, 8-PDIP | Texas Instruments
TL072CP ✓ ActiveSpecification Comparison
| Parameter | MC33072PG | TL072CP |
|---|---|---|
| Brand | onsemi | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Amplifier Type | General-purpose operational amplifier | JFET-Input Operational Amplifier |
| Number of Amplifiers | 2 circuits | — |
| Architecture | Voltage-feedback dual amplifier | — |
| Semiconductor Technology | Bipolar | — |
| Supply Voltage Range | 3.0 V to 44 V | — |
| Single-Supply Operation | Supported | — |
| Split-Supply Operation | Supported | — |
| Gain-Bandwidth Product | 4.5 MHz | — |
| Slew Rate | 13 V/us | 13 V/µs (typical) |
| Input Offset Voltage | 5 mV maximum | 3 mV (typical, C grade) |
| Common-Mode Rejection Ratio | 97 dB nominal | — |
| Operating Temperature Range | -40 C to +85 C | 0°C to +70°C (C grade) |
| Package | 8-PDIP, 0.300 inch (7.62 mm) pitch | — |
| Packaging | Tube | — |
| Mounting Type | Through-hole | Through Hole |
| RoHS Status | RoHS-compliant and lead-free | Compliant |
| Input Bias Current | [DATA_NEEDED: input bias current] | 30 pA (typical) |
| Quiescent Supply Current | [DATA_NEEDED: quiescent supply current] | — |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Output Swing | [DATA_NEEDED: output voltage swing] | — |
| Open-Loop Gain | [DATA_NEEDED: open-loop gain] | — |
| Manufacturer | — | Texas Instruments |
| Part Status | — | Active |
| Number of Circuits | — | 2 (Dual) |
| Gain Bandwidth Product | — | 3 MHz (typical) |
| Input Noise Voltage Density | — | 18 nV/√Hz (typical at 1 kHz) |
| Total Harmonic Distortion | — | 0.003% (typical) |
| Supply Voltage Range (Dual) | — | ±3.5 V to ±18 V |
| Supply Voltage Range (Single) | — | 7 V to 36 V |
| Package / Case | — | 8-PDIP (Plastic DIP, through-hole) |
| Pin Count | — | 8 |
| Output Short-Circuit Protection | — | Yes |
| Internal Frequency Compensation | — | Yes |
| Latch-up Free Operation | — | Yes |