MC33072PG vs TL072CP Vergleich
Detaillierter Direktvergleich von MC33072PG von onsemi und TL072CP von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
TL072CP - Dual JFET-Input Low-Noise Op Amp, 8-PDIP | Texas Instruments
TL072CP ✓ AktivSpezifikationsvergleich
| Parameter | MC33072PG | TL072CP |
|---|---|---|
| Marke | onsemi | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Amplifier Type | General-purpose operational amplifier | JFET-Input Operational Amplifier |
| Number of Amplifiers | 2 circuits | — |
| Architecture | Voltage-feedback dual amplifier | — |
| Semiconductor Technology | Bipolar | — |
| Supply Voltage Range | 3.0 V to 44 V | — |
| Single-Supply Operation | Supported | — |
| Split-Supply Operation | Supported | — |
| Gain-Bandwidth Product | 4.5 MHz | — |
| Slew Rate | 13 V/us | 13 V/µs (typical) |
| Input Offset Voltage | 5 mV maximum | 3 mV (typical, C grade) |
| Common-Mode Rejection Ratio | 97 dB nominal | — |
| Betriebstemperaturbereich | -40 C to +85 C | 0°C to +70°C (C grade) |
| Gehäuse | 8-PDIP, 0.300 inch (7.62 mm) pitch | — |
| Packaging | Tube | — |
| Montageart | Through-hole | Through Hole |
| RoHS-Status | RoHS-compliant and lead-free | Compliant |
| Input Bias Current | [DATA_NEEDED: input bias current] | 30 pA (typical) |
| Quiescent Supply Current | [DATA_NEEDED: quiescent supply current] | — |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Output Swing | [DATA_NEEDED: output voltage swing] | — |
| Open-Loop Gain | [DATA_NEEDED: open-loop gain] | — |
| Manufacturer | — | Texas Instruments |
| Part Status | — | Active |
| Number of Circuits | — | 2 (Dual) |
| Gain Bandwidth Product | — | 3 MHz (typical) |
| Input Noise Voltage Density | — | 18 nV/√Hz (typical at 1 kHz) |
| Total Harmonic Distortion | — | 0.003% (typical) |
| Supply Voltage Range (Dual) | — | ±3.5 V to ±18 V |
| Supply Voltage Range (Single) | — | 7 V to 36 V |
| Gehäuse / Bauform | — | 8-PDIP (Plastic DIP, through-hole) |
| Pin-Anzahl | — | 8 |
| Output Short-Circuit Protection | — | Yes |
| Internal Frequency Compensation | — | Yes |
| Latch-up Free Operation | — | Yes |