MC33072PG vs TL072CP Comparaison
Comparaison détaillée côte à côte de MC33072PG par onsemi et TL072CP par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
TL072CP - Dual JFET-Input Low-Noise Op Amp, 8-PDIP | Texas Instruments
TL072CP ✓ ActifComparaison des spécifications
| Paramètre | MC33072PG | TL072CP |
|---|---|---|
| Marque | onsemi | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Amplifier Type | General-purpose operational amplifier | JFET-Input Operational Amplifier |
| Number of Amplifiers | 2 circuits | — |
| Architecture | Voltage-feedback dual amplifier | — |
| Semiconductor Technology | Bipolar | — |
| Supply Voltage Range | 3.0 V to 44 V | — |
| Single-Supply Operation | Supported | — |
| Split-Supply Operation | Supported | — |
| Gain-Bandwidth Product | 4.5 MHz | — |
| Slew Rate | 13 V/us | 13 V/µs (typical) |
| Input Offset Voltage | 5 mV maximum | 3 mV (typical, C grade) |
| Common-Mode Rejection Ratio | 97 dB nominal | — |
| Plage de température de fonctionnement | -40 C to +85 C | 0°C to +70°C (C grade) |
| Boîtier | 8-PDIP, 0.300 inch (7.62 mm) pitch | — |
| Packaging | Tube | — |
| Type de montage | Through-hole | Through Hole |
| Statut RoHS | RoHS-compliant and lead-free | Compliant |
| Input Bias Current | [DATA_NEEDED: input bias current] | 30 pA (typical) |
| Quiescent Supply Current | [DATA_NEEDED: quiescent supply current] | — |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Output Swing | [DATA_NEEDED: output voltage swing] | — |
| Open-Loop Gain | [DATA_NEEDED: open-loop gain] | — |
| Manufacturer | — | Texas Instruments |
| Part Status | — | Active |
| Number of Circuits | — | 2 (Dual) |
| Gain Bandwidth Product | — | 3 MHz (typical) |
| Input Noise Voltage Density | — | 18 nV/√Hz (typical at 1 kHz) |
| Total Harmonic Distortion | — | 0.003% (typical) |
| Supply Voltage Range (Dual) | — | ±3.5 V to ±18 V |
| Supply Voltage Range (Single) | — | 7 V to 36 V |
| Boîtier / Format | — | 8-PDIP (Plastic DIP, through-hole) |
| Nombre de broches | — | 8 |
| Output Short-Circuit Protection | — | Yes |
| Internal Frequency Compensation | — | Yes |
| Latch-up Free Operation | — | Yes |