MCZ33742SEG vs MCZ33742EGR2 Comparison

Detailed side-by-side comparison of MCZ33742SEG by NXP Semiconductors and MCZ33742EGR2 by NXP Semiconductors. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.

NXP Semiconductors
MCZ33742SEG MCZ33742SEG - SBC with HS-CAN & 5V LDO | NXP Semiconductors

MCZ33742SEG - SBC with HS-CAN & 5V LDO | NXP Semiconductors

MCZ33742SEG ✓ Active
NXP Semiconductors
MCZ33742EGR2 MCZ33742EGR2 - System Basis Chip w/ HS-CAN Transceiver | NXP

MCZ33742EGR2 - System Basis Chip w/ HS-CAN Transceiver | NXP

MCZ33742EGR2 ✓ Active

Specification Comparison

Parameter MCZ33742SEG MCZ33742EGR2
Brand NXP Semiconductors NXP Semiconductors
Category Power Management Voltage Regulators
Lifecycle Status Active Active
Stock Status In Stock In Stock
Unit Price (USD) $3.35 $4.10
Function System Basis Chip with HS-CAN Transceiver & 5.0 V LDO —
Supply Voltage (VCC) 5.5 V to 18 V (5.5 V–27 V tolerant, 40 V load-dump rated) —
Supply Current (typ) 42 mA —
CAN Data Rate 1.0 Mbps (CAN 2.0A/B compliant, ISO 11898-5) 1 Mbps (High-Speed CAN 2.0b)
SPI Control Frequency up to 4.0 MHz —
On-board LDO Output Voltage 5.0 V (fixed) —
LDO Current Limit Yes (with current limiting) —
Overtemperature Prewarning Yes —
Reset Output Yes (LDO output monitoring & reset) —
Output Drive Type High-side drive with sense input —
Bus Diagnostic TXD dominant timeout, bus-fault detection —
Operating Temperature -40 °C to +125 °C [DATA_NEEDED: operating temperature range]
Package 28-SOIC (0.295" / 7.50 mm width) 28-SOIC Wide Body (0.295 inch, 7.50 mm width)
Mounting Type Surface Mount Surface Mount
Packaging Tube Tape & Reel (TR)
RoHS Status Compliant Compliant (NXP product family standard)
Product Type — System Basis Chip (SBC) with HS-CAN Transceiver
Manufacturer — Freescale / NXP Semiconductors
Supply Voltage (VBAT) — 5.5 V to 18 V
Supply Current — 42 mA (typical operating)
Supported Bus Voltages — 5 V / 9 V / 12 V / 15 V / 18 V / 24 V (12 V automotive nominal)
Low-Power Modes — Sleep / Standby / Stop
Control Interface — SPI
Integrated Functions — 5V regulator, CAN transceiver, watchdog, voltage monitoring, reset generator
Compliance / Standard — CAN 2.0b compliant; ISO 11898-2/5 physical layer
MSL Level — [DATA_NEEDED: MSL rating]

Datasheets & Resources

Browse All Products Create BOM Request Quote