MCZ33742SEG vs MCZ33742EGR2 Comparación
Comparación detallada lado a lado de MCZ33742SEG por NXP Semiconductors y MCZ33742EGR2 por NXP Semiconductors. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
NXP Semiconductors
MCZ33742EGR2 - System Basis Chip w/ HS-CAN Transceiver | NXP
MCZ33742EGR2 ✓ ActivoComparación de especificaciones
| Parámetro | MCZ33742SEG | MCZ33742EGR2 |
|---|---|---|
| Marca | NXP Semiconductors | NXP Semiconductors |
| Categoría | Power Management | Voltage Regulators |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $3,35 | $4,10 |
| Función | System Basis Chip with HS-CAN Transceiver & 5.0 V LDO | — |
| Supply Voltage (VCC) | 5.5 V to 18 V (5.5 V–27 V tolerant, 40 V load-dump rated) | — |
| Supply Current (typ) | 42 mA | — |
| CAN Data Rate | 1.0 Mbps (CAN 2.0A/B compliant, ISO 11898-5) | 1 Mbps (High-Speed CAN 2.0b) |
| SPI Control Frequency | up to 4.0 MHz | — |
| On-board LDO Output Voltage | 5.0 V (fixed) | — |
| LDO Current Limit | Yes (with current limiting) | — |
| Overtemperature Prewarning | Yes | — |
| Reset Output | Yes (LDO output monitoring & reset) | — |
| Output Drive Type | High-side drive with sense input | — |
| Bus Diagnostic | TXD dominant timeout, bus-fault detection | — |
| Temperatura de funcionamiento | -40 °C to +125 °C | [DATA_NEEDED: operating temperature range] |
| Encapsulado | 28-SOIC (0.295" / 7.50 mm width) | 28-SOIC Wide Body (0.295 inch, 7.50 mm width) |
| Tipo de montaje | Surface Mount | Surface Mount |
| Packaging | Tube | Tape & Reel (TR) |
| Estado RoHS | Compliant | Compliant (NXP product family standard) |
| Product Type | — | System Basis Chip (SBC) with HS-CAN Transceiver |
| Manufacturer | — | Freescale / NXP Semiconductors |
| Supply Voltage (VBAT) | — | 5.5 V to 18 V |
| Corriente de alimentación | — | 42 mA (typical operating) |
| Supported Bus Voltages | — | 5 V / 9 V / 12 V / 15 V / 18 V / 24 V (12 V automotive nominal) |
| Low-Power Modes | — | Sleep / Standby / Stop |
| Control Interface | — | SPI |
| Integrated Functions | — | 5V regulator, CAN transceiver, watchdog, voltage monitoring, reset generator |
| Compliance / Standard | — | CAN 2.0b compliant; ISO 11898-2/5 physical layer |
| Nivel MSL | — | [DATA_NEEDED: MSL rating] |