MCZ33742SEG vs MCZ33742EGR2 Perbandingan

Perbandingan bersamaan detil MCZ33742SEG dari NXP Semiconductors dan MCZ33742EGR2 dari NXP Semiconductors. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.

NXP Semiconductors
MCZ33742SEG MCZ33742SEG - SBC with HS-CAN & 5V LDO | NXP Semiconductors

MCZ33742SEG - SBC with HS-CAN & 5V LDO | NXP Semiconductors

MCZ33742SEG ✓ Aktif
NXP Semiconductors
MCZ33742EGR2 MCZ33742EGR2 - System Basis Chip w/ HS-CAN Transceiver | NXP

MCZ33742EGR2 - System Basis Chip w/ HS-CAN Transceiver | NXP

MCZ33742EGR2 ✓ Aktif

Perbandingan Spesifikasi

Parameter Umum MCZ33742SEG MCZ33742EGR2
Merek NXP Semiconductors NXP Semiconductors
Kategori Power Management Voltage Regulators
Status Lingkungan Hidup Aktif Aktif
Fungsi System Basis Chip with HS-CAN Transceiver & 5.0 V LDO —
Supply Voltage (VCC) 5.5 V to 18 V (5.5 V–27 V tolerant, 40 V load-dump rated) —
Supply Current (typ) 42 mA —
CAN Data Rate 1.0 Mbps (CAN 2.0A/B compliant, ISO 11898-5) 1 Mbps (High-Speed CAN 2.0b)
SPI Control Frequency up to 4.0 MHz —
On-board LDO Output Voltage 5.0 V (fixed) —
LDO Current Limit Yes (with current limiting) —
Overtemperature Prewarning Yes —
Reset Output Yes (LDO output monitoring & reset) —
Output Drive Type High-side drive with sense input —
Bus Diagnostic TXD dominant timeout, bus-fault detection —
Suhu Kerja -40 °C to +125 °C [DATA_NEEDED: operating temperature range]
Paket 28-SOIC (0.295" / 7.50 mm width) 28-SOIC Wide Body (0.295 inch, 7.50 mm width)
Tipe Mounting Surface Mount Surface Mount
Packaging Tube Tape & Reel (TR)
Status RoHS Compliant Compliant (NXP product family standard)
Product Type — System Basis Chip (SBC) with HS-CAN Transceiver
Manufacturer — Freescale / NXP Semiconductors
Supply Voltage (VBAT) — 5.5 V to 18 V
Arus Pemuat — 42 mA (typical operating)
Supported Bus Voltages — 5 V / 9 V / 12 V / 15 V / 18 V / 24 V (12 V automotive nominal)
Low-Power Modes — Sleep / Standby / Stop
Control Interface — SPI
Integrated Functions — 5V regulator, CAN transceiver, watchdog, voltage monitoring, reset generator
Compliance / Standard — CAN 2.0b compliant; ISO 11898-2/5 physical layer
Level MSL — [DATA_NEEDED: MSL rating]

Spek dan Sumber

Buka Semua Produk Buat BOM Ajukan Diskon