MP3H6115A6U vs MPXH6115A6U Comparison

Detailed side-by-side comparison of MP3H6115A6U by NXP Semiconductors and MPXH6115A6U by NXP Semiconductors. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.

NXP Semiconductors
MP3H6115A6U MP3H6115A6U - 15-115 kPa Absolute Pressure Sensor | NXP

MP3H6115A6U - 15-115 kPa Absolute Pressure Sensor | NXP

MP3H6115A6U ✓ Active
NXP Semiconductors
MPXH6115A6U MPXH6115A6U - 15-115 kPa Absolute Pressure Sensor, SOIC-8 | NXP

MPXH6115A6U - 15-115 kPa Absolute Pressure Sensor, SOIC-8 | NXP

MPXH6115A6U ✓ Active

Specification Comparison

Parameter MP3H6115A6U MPXH6115A6U
Brand NXP Semiconductors NXP Semiconductors
Category Pressure Sensors Pressure Sensors
Lifecycle Status Active Active
Stock Status In Stock In Stock
Unit Price (USD) $4.85 $9.95
Sensor Type Absolute pressure sensor —
Pressure Range 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) —
Supply Voltage 3 V 4.75 V to 5.25 V
Output Type Analog, ratiometric Analog, ratiometric to VCC
Output Voltage Range 0.12 V to 2.8 V 0.2 V to 4.7 V
Operating Pressure 15 kPa ~ 115 kPa —
Pressure Port Male - 0.13 inch (3.3 mm) tube Vertical/Horizontal axial port (case variant 6)
Accuracy High accuracy at high temperature (per datasheet) —
Temperature Compensation -40 C to +125 C —
Technology Piezoresistive (MEMS) with bipolar signal conditioning —
Package 8-SOIC (SOP-8), 0.295 inch / 7.50 mm body width 8-SOIC (0.295", 7.50 mm width) with top-side pressure port
Mounting Type Surface Mount Surface Mount
Signal Conditioning On-chip bipolar op-amp and thin-film resistor network —
Output Ratiometric Yes (output proportional to VDD) —
Operating Temperature -40 C to +125 C -40C to +125C
Package Material Durable thermoplastic (PPS) surface-mount package —
RoHS Status Compliant [DATA_NEEDED: RoHS compliance]
Pressure Type — Absolute
Operating Pressure Range — 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI)
Maximum Over-Pressure — 400 kPa
Sensitivity — 45.9 mV/kPa (typical)
Accuracy (0C to 85C) — 1.5 % (max)
Supply Current — 6 mA (typical)
Compensated Temperature — 0C to +85C
Media Compatibility — Dry air, non-corrosive gases only

Datasheets & Resources

Browse All Products Create BOM Request Quote