MP3H6115A6U vs MPXH6115A6U Comparaison

Comparaison détaillée côte à côte de MP3H6115A6U par NXP Semiconductors et MPXH6115A6U par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

NXP Semiconductors
MP3H6115A6U MP3H6115A6U - 15-115 kPa Absolute Pressure Sensor | NXP

MP3H6115A6U - 15-115 kPa Absolute Pressure Sensor | NXP

MP3H6115A6U ✓ Actif
NXP Semiconductors
MPXH6115A6U MPXH6115A6U - 15-115 kPa Absolute Pressure Sensor, SOIC-8 | NXP

MPXH6115A6U - 15-115 kPa Absolute Pressure Sensor, SOIC-8 | NXP

MPXH6115A6U ✓ Actif

Comparaison des spécifications

Paramètre MP3H6115A6U MPXH6115A6U
Marque NXP Semiconductors NXP Semiconductors
Catégorie Pressure Sensors Pressure Sensors
Statut du cycle de vie Actif Actif
Statut du stock In Stock In Stock
Prix unitaire (USD) $4,85 $9,95
Type de capteur Absolute pressure sensor —
Pressure Range 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) —
Tension d'alimentation 3 V 4.75 V to 5.25 V
Type de sortie Analog, ratiometric Analog, ratiometric to VCC
Plage de tension de sortie 0.12 V to 2.8 V 0.2 V to 4.7 V
Operating Pressure 15 kPa ~ 115 kPa —
Pressure Port Male - 0.13 inch (3.3 mm) tube Vertical/Horizontal axial port (case variant 6)
Accuracy High accuracy at high temperature (per datasheet) —
Temperature Compensation -40 C to +125 C —
Technology Piezoresistive (MEMS) with bipolar signal conditioning —
Boîtier 8-SOIC (SOP-8), 0.295 inch / 7.50 mm body width 8-SOIC (0.295", 7.50 mm width) with top-side pressure port
Type de montage Surface Mount Surface Mount
Signal Conditioning On-chip bipolar op-amp and thin-film resistor network —
Output Ratiometric Yes (output proportional to VDD) —
Température de fonctionnement -40 C to +125 C -40C to +125C
Package Material Durable thermoplastic (PPS) surface-mount package —
Statut RoHS Compliant [DATA_NEEDED: RoHS compliance]
Pressure Type — Absolute
Operating Pressure Range — 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI)
Maximum Over-Pressure — 400 kPa
Sensitivity — 45.9 mV/kPa (typical)
Accuracy (0C to 85C) — 1.5 % (max)
Courant d'alimentation — 6 mA (typical)
Compensated Temperature — 0C to +85C
Media Compatibility — Dry air, non-corrosive gases only

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis