MP3H6115A6U vs MPXH6115A6U Vergleich

Detaillierter Direktvergleich von MP3H6115A6U von NXP Semiconductors und MPXH6115A6U von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.

NXP Semiconductors
MP3H6115A6U MP3H6115A6U - 15-115 kPa Absolute Pressure Sensor | NXP

MP3H6115A6U - 15-115 kPa Absolute Pressure Sensor | NXP

MP3H6115A6U ✓ Aktiv
NXP Semiconductors
MPXH6115A6U MPXH6115A6U - 15-115 kPa Absolute Pressure Sensor, SOIC-8 | NXP

MPXH6115A6U - 15-115 kPa Absolute Pressure Sensor, SOIC-8 | NXP

MPXH6115A6U ✓ Aktiv

Spezifikationsvergleich

Parameter MP3H6115A6U MPXH6115A6U
Marke NXP Semiconductors NXP Semiconductors
Kategorie Pressure Sensors Pressure Sensors
Lebenszyklusstatus Aktiv Aktiv
Lagerstatus In Stock In Stock
Stückpreis (USD) $4,85 $9,95
Sensortyp Absolute pressure sensor —
Pressure Range 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) —
Versorgungsspannung 3 V 4.75 V to 5.25 V
Ausgangstyp Analog, ratiometric Analog, ratiometric to VCC
Ausgangsspannungsbereich 0.12 V to 2.8 V 0.2 V to 4.7 V
Operating Pressure 15 kPa ~ 115 kPa —
Pressure Port Male - 0.13 inch (3.3 mm) tube Vertical/Horizontal axial port (case variant 6)
Accuracy High accuracy at high temperature (per datasheet) —
Temperature Compensation -40 C to +125 C —
Technology Piezoresistive (MEMS) with bipolar signal conditioning —
Gehäuse 8-SOIC (SOP-8), 0.295 inch / 7.50 mm body width 8-SOIC (0.295", 7.50 mm width) with top-side pressure port
Montageart Surface Mount Surface Mount
Signal Conditioning On-chip bipolar op-amp and thin-film resistor network —
Output Ratiometric Yes (output proportional to VDD) —
Betriebstemperatur -40 C to +125 C -40C to +125C
Package Material Durable thermoplastic (PPS) surface-mount package —
RoHS-Status Compliant [DATA_NEEDED: RoHS compliance]
Pressure Type — Absolute
Operating Pressure Range — 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI)
Maximum Over-Pressure — 400 kPa
Sensitivity — 45.9 mV/kPa (typical)
Accuracy (0C to 85C) — 1.5 % (max)
Versorgungsstrom — 6 mA (typical)
Compensated Temperature — 0C to +85C
Media Compatibility — Dry air, non-corrosive gases only

Datenblätter & Ressourcen

Alle Produkte durchsuchen BOM erstellen Angebot anfordern