MPX2202ASX vs MPX2202GP Comparison
Detailed side-by-side comparison of MPX2202ASX by NXP Semiconductors and MPX2202GP by NXP Semiconductors. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | MPX2202ASX | MPX2202GP |
|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors |
| Category | Pressure Sensors | Pressure Sensors |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $10.45 | $24.80 |
| Sensor Type | Absolute Pressure Sensor | — |
| Operating Pressure Range | 0 kPa to 200 kPa (0 PSI to 29.01 PSI) | 0 kPa to 200 kPa (0 to 29.01 PSI) |
| Maximum Overpressure | 58.02 PSI (400 kPa) | — |
| Output Type | Analog Voltage (Wheatstone bridge differential) | — |
| Output Voltage Span | 0 mV to 40 mV at 10 V excitation | — |
| Excitation Voltage | 10 V (typical) | — |
| Pressure Port | Male 0.19 inch (4.93 mm) barbed tube | — |
| Pressure Type | Absolute (vs. sealed vacuum reference) | Vented Gauge |
| Sensing Technology | Silicon piezoresistive, on-chip temperature compensated & calibrated | — |
| Temperature Compensation | 0 C to +85 C (on-chip) | — |
| Linearity / Hysteresis | approximately 1.0 %VFSS max [DATA_NEEDED: exact spec from datasheet] | — |
| Package / Case | 4-SIP Module (through-hole) | 4-SIP Top Port Module |
| Mounting Type | Through-Hole | Through Hole |
| Port / Termination | Solder | — |
| Pin Count | 4 | — |
| RoHS Status | unknown | [DATA_NEEDED: RoHS compliance] |
| Compatible Media | Dry non-corrosive gases (air) | — |
| Maximum Overload Pressure | — | [DATA_NEEDED: maximum overload pressure] |
| Output Voltage | — | 0 mV to 40 mV (at 10 V excitation) |
| Supply Voltage | — | 10 V DC nominal |
| Supply Current | — | [DATA_NEEDED: supply current] |
| Operating Temperature | — | -40 C to +125 C [DATA_NEEDED: confirm from datasheet curves] |
| Port Size | — | Male, 0.19 in (4.93 mm) Tube |
| Termination Style | — | Through-Hole (PCB) |
| Accuracy | — | [DATA_NEEDED: linearity / accuracy specification] |
| Media Compatibility | — | Dry air or non-corrosive gases (per datasheet) |
| Compensation | — | On-chip temperature compensated and calibrated |