MPX2202ASX vs MPX2202GP Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci MPX2202ASX disebabkan oleh NXP Semiconductors dan MPX2202GP disebabkan oleh NXP Semiconductors. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Pengandingan Spesifikasi
| Parametr | MPX2202ASX | MPX2202GP |
|---|---|---|
| Merek | NXP Semiconductors | NXP Semiconductors |
| Kategori | Pressure Sensors | Pressure Sensors |
| Status Lingkungan Hidup | Aktif | Aktif |
| Jenis Sensus | Absolute Pressure Sensor | — |
| Operating Pressure Range | 0 kPa to 200 kPa (0 PSI to 29.01 PSI) | 0 kPa to 200 kPa (0 to 29.01 PSI) |
| Maximum Overpressure | 58.02 PSI (400 kPa) | — |
| Jenis Output | Analog Voltage (Wheatstone bridge differential) | — |
| Output Voltage Span | 0 mV to 40 mV at 10 V excitation | — |
| Excitation Voltage | 10 V (typical) | — |
| Pressure Port | Male 0.19 inch (4.93 mm) barbed tube | — |
| Pressure Type | Absolute (vs. sealed vacuum reference) | Vented Gauge |
| Sensing Technology | Silicon piezoresistive, on-chip temperature compensated & calibrated | — |
| Temperature Compensation | 0 C to +85 C (on-chip) | — |
| Linearity / Hysteresis | approximately 1.0 %VFSS max [DATA_NEEDED: exact spec from datasheet] | — |
| Kemasan / Case | 4-SIP Module (through-hole) | 4-SIP Top Port Module |
| Jenis Pemasangan | Through-Hole | Through Hole |
| Port / Termination | Solder | — |
| Kiraan Pin | 4 | — |
| Status RoHS | unknown | [DATA_NEEDED: RoHS compliance] |
| Compatible Media | Dry non-corrosive gases (air) | — |
| Maximum Overload Pressure | — | [DATA_NEEDED: maximum overload pressure] |
| Tegangan Output | — | 0 mV to 40 mV (at 10 V excitation) |
| Tegangan Pemberi Arus | — | 10 V DC nominal |
| Arus Pemberi Arus | — | [DATA_NEEDED: supply current] |
| Suhu Operasi | — | -40 C to +125 C [DATA_NEEDED: confirm from datasheet curves] |
| Port Size | — | Male, 0.19 in (4.93 mm) Tube |
| Termination Style | — | Through-Hole (PCB) |
| Accuracy | — | [DATA_NEEDED: linearity / accuracy specification] |
| Media Compatibility | — | Dry air or non-corrosive gases (per datasheet) |
| Compensation | — | On-chip temperature compensated and calibrated |