MPX2202ASX vs MPX2202GP Vergleich
Detaillierter Direktvergleich von MPX2202ASX von NXP Semiconductors und MPX2202GP von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | MPX2202ASX | MPX2202GP |
|---|---|---|
| Marke | NXP Semiconductors | NXP Semiconductors |
| Kategorie | Pressure Sensors | Pressure Sensors |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $10,45 | $24,80 |
| Sensortyp | Absolute Pressure Sensor | — |
| Operating Pressure Range | 0 kPa to 200 kPa (0 PSI to 29.01 PSI) | 0 kPa to 200 kPa (0 to 29.01 PSI) |
| Maximum Overpressure | 58.02 PSI (400 kPa) | — |
| Ausgangstyp | Analog Voltage (Wheatstone bridge differential) | — |
| Output Voltage Span | 0 mV to 40 mV at 10 V excitation | — |
| Excitation Voltage | 10 V (typical) | — |
| Pressure Port | Male 0.19 inch (4.93 mm) barbed tube | — |
| Pressure Type | Absolute (vs. sealed vacuum reference) | Vented Gauge |
| Sensing Technology | Silicon piezoresistive, on-chip temperature compensated & calibrated | — |
| Temperature Compensation | 0 C to +85 C (on-chip) | — |
| Linearity / Hysteresis | approximately 1.0 %VFSS max [DATA_NEEDED: exact spec from datasheet] | — |
| Gehäuse / Bauform | 4-SIP Module (through-hole) | 4-SIP Top Port Module |
| Montageart | Through-Hole | Through Hole |
| Port / Termination | Solder | — |
| Pin-Anzahl | 4 | — |
| RoHS-Status | unknown | [DATA_NEEDED: RoHS compliance] |
| Compatible Media | Dry non-corrosive gases (air) | — |
| Maximum Overload Pressure | — | [DATA_NEEDED: maximum overload pressure] |
| Ausgangsspannung | — | 0 mV to 40 mV (at 10 V excitation) |
| Versorgungsspannung | — | 10 V DC nominal |
| Versorgungsstrom | — | [DATA_NEEDED: supply current] |
| Betriebstemperatur | — | -40 C to +125 C [DATA_NEEDED: confirm from datasheet curves] |
| Port Size | — | Male, 0.19 in (4.93 mm) Tube |
| Termination Style | — | Through-Hole (PCB) |
| Accuracy | — | [DATA_NEEDED: linearity / accuracy specification] |
| Media Compatibility | — | Dry air or non-corrosive gases (per datasheet) |
| Compensation | — | On-chip temperature compensated and calibrated |